Electrochemical Anodic Formation of VO2 Nanotubes and Hydrogen Sorption Property

نویسندگان

چکیده

We investigated the feasibility of hydrogen storage with electrochemically formed VO2 nanotubes. The nanotubes were fabricated through anodization vanadium metal in fluoride ion-containing organic electrolyte followed by an annealing process Ar-saturated atmosphere at 673 K for 3 h a heating rate /min. During anodization, current density significantly increased up to 7.93 mA/cm2 approximately 500 s owing heat generation, which led fast-electrochemical etching reaction outermost part By controlling temperature, highly ordered grown on substrate without using any binders or adhesives. Furthermore, we demonstrated sorption properties anodic Keywords: Anodization, VO2, Nanotubes, Hydrogen Adsorption

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Hydrogen storage in carbon nanotubes with Ni nanoparticles by electrochemical

In this paper, the electrochemical hydrogen storage in nanocomposite materials was studied. Multi-Walled Carbon Nanotubes (MWCNTs) electrode was prepared by mixing with special composite. The optimum ratio of MWCNTs was estimated 30-70% (w/w) in the composite material. MWCNTs were synthesized by Chemical vapor deposition (CVD). The nanocomposite was homogenized by microwave. Cyclic voltammetry ...

متن کامل

Hydrogen storage in carbon nanotubes with Ni nanoparticles by electrochemical

In this paper, the electrochemical hydrogen storage in nanocomposite materials was studied. Multi-Walled Carbon Nanotubes (MWCNTs) electrode was prepared by mixing with special composite. The optimum ratio of MWCNTs was estimated 30-70% (w/w) in the composite material. MWCNTs were synthesized by Chemical vapor deposition (CVD). The nanocomposite was homogenized by microwave. Cyclic voltammetry ...

متن کامل

Preparation and electrochemical property of Fe2O3 nanoparticles-filled carbon nanotubes.

Fe(2)O(3) nanoparticles with a mean diameter of ~9 nm were homogeneously filled into the hollow core of high aspect ratio CNTs synthesized by the AAO template method with tunable filling ratios. These Fe(2)O(3)-filled CNTs were employed as the anode material of lithium-ion battery, and desirable electrochemical properties of high reversible lithium storage capacity and good rate capability were...

متن کامل

Anodic formation of high aspect ratio, self-ordered Nb2O5 nanotubes.

In the present work, we demonstrate the feasibility to form an aligned Nb(2)O(5) nanotube layer by self-organizing anodization of Nb in a NH(4)F-glycerol electrolyte. In order to achieve a nanotubular rather than a nanoporous layer, careful optimization of the anodization electrolyte is required. We show that only in a narrow window of electrolyte parameters highly aligned nanotubes of 50 nm in...

متن کامل

hydrogen storage in carbon nanotubes with ni nanoparticles by electrochemical

in this paper, the electrochemical hydrogen storage in nanocomposite materials was studied. multi-walled carbon nanotubes (mwcnts) electrode was prepared by mixing with special composite. the optimum ratio of mwcnts was estimated 30-70% (w/w) in the composite material. mwcnts were synthesized by chemical vapor deposition (cvd). the nanocomposite was homogenized by microwave. cyclic voltammetry ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Journal of electrochemical science and technology

سال: 2021

ISSN: ['2093-8551', '2288-9221']

DOI: https://doi.org/10.33961/jecst.2020.01347