Electrochemical Behaviour of PACVD TiN-Coated CoCrMo Medical Alloy
نویسندگان
چکیده
منابع مشابه
The electrochemical and mechanical behavior of passivated and TiN/AlN-coated CoCrMo and Ti6Al4V alloys.
The mechanical and electrochemical behavior of the surface oxides of CoCrMo and Ti6Al4V alloys during fracture and repassivation play an important role in the corrosion of the taper interfaces of modular hip implants. This behavior was investigated in one group of CoCrMo and Ti6Al4V alloy samples passivated with nitric acid and another group coated with a novel TiN/AlN coating. The effects of m...
متن کاملAn investigation on the biotribocorrosion behaviour of CoCrMo alloy grafted with polyelectrolyte brush.
Surface grafting of polyelectrolyte brush, such as 3-sulfopropyl methacrylate potassium salt (SPMK), on hip implant materials has been reported to reduce the wear of the orthopaedic bearing surface. However, the biotribocorrosion behaviour of the SPMK brush has not been taken into consideration in previous research. In the present study, SPMK was grafted on Co28Cr6Mo alloy through photo-induced...
متن کاملAlbumin adsorption on CoCrMo alloy surfaces
Proteins can adsorb on the surface of artificial joints immediately after being implanted. Although research studying protein adsorption on medical material surfaces has been carried out, the mechanism of the proteins' adsorption which affects the corrosion behaviour of such materials still lacks in situ observation at the micro level. The adsorption of bovine serum albumin (BSA) on CoCrMo allo...
متن کاملElectrochemical behaviour of Alloy 600 tubing in thiosulphate solution
Electrochemical and surface properties of passive films formed on Alloy 600 in a thiosulphate solution were studied. Oxide films formed at various passive potentials contained a bilayer oxide, whose composition changed as a function of the applied potential resulting in a change in the impedance behaviour. Destabilisation of the oxide film at potentials within the passive region was observed, w...
متن کاملIntergranular pitting corrosion of CoCrMo biomedical implant alloy.
CoCrMo samples of varying microstructure and carbon content were electrochemically corroded in vitro and examined by scanning electron microscopy and electron backscatter diffraction techniques. The rate of corrosion was minimized (80% reduction from icorr = 1396 nA/cm(2) to icorr = 276 nA/cm(2) ) in high-carbon CoCrMo alloys which displayed a coarser grain structure and partially dissolved sec...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Metals
سال: 2017
ISSN: 2075-4701
DOI: 10.3390/met7070231