Electrochemical property and corrosion behavior of Al-0.1 mass%Sn-Fe alloys.
نویسندگان
چکیده
منابع مشابه
The Electrochemical Behavior of Al Alloys in NaCl Solution in the Presence of Pyrazole Derivative
This paper studies the corrosion inhibition of Al-Mg alloy system in 0.5 mol/dm3 NaCl solution in the presence of pyrazole derivative using potentiodynamic polarization and linear polarization method. The inhibition efficiency as a function of concentration and temperature was investigated. From the polarization curves, it can be concluded that the pyrazole derivative be...
متن کاملEffect of Cu content on the Electrochemical Corrosion Behavior of Peak-aged Al-6Si-0.5Mg Alloys in Sodium Chloride Solution
The purpose of this study is to understand the electrochemical corrosion behavior of 1wt% Cu content Al-6Si-0.5Mg alloy in 0.1M NaCl solution. The potentiodynamic polarization curves reveal that 1wt% Cu content alloy is less prone to corrosion than the Cu free alloy. The EIS test results show that corrosion resistance or polarization resistance (Rct) increases with the addition of 1wt% Cu to Al...
متن کاملElectrochemical and Corrosion Behavior of Nanocrystalline TiNi-Based Alloys and Composite
In this work TiNi-based nanocrystalline alloys and composite were produced by mechanical alloying process with subsequent annealing at 750 ◦C for 0.5 h. Mechanical alloying was performed in a SPEX 8000 Mixer Mill. TiNi alloy was chemically modi ed by Ag elemental powder. Silver content equaled 5 wt%. X-ray di raction analyses revealed formation of TiNi main phase after annealing. Additionally, ...
متن کاملElectrochemical corrosion behavior of biomedical Ti–22Nb and Ti–22Nb–6Zr alloys in saline medium
The aims of this study were to investigate the effects of Zr addition and potentiodynamic polarization on the microstructure and corrosion resistance of Ti–22Nb and Ti–22Nb–6Zr alloy samples. The corrosion tests were carried out in 0.9% NaCl at 37 8C and neutral pH value, utilizing the OCP, potentiodynamic polarization, and electrochemical impedance spectroscopy (EIS) techniques.The results of ...
متن کاملMicrostructure, mechanical property, corrosion behavior, and in vitro biocompatibility of Zr-Mo alloys.
In this study, the microstructure, mechanical properties, corrosion behaviors, and in vitro biocompatibility of Zr-Mo alloys as a function of Mo content after solution treatment were systemically investigated to assess their potential use in biomedical application. The experimental results indicated that Zr-1Mo alloy mainly consisted of an acicular structure of α' phase, while ω phase formed in...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Japan Institute of Light Metals
سال: 1997
ISSN: 0451-5994,1880-8018
DOI: 10.2464/jilm.47.452