Electrochromism in materials prepared by the sol-gel process
نویسندگان
چکیده
منابع مشابه
Polyacrylate/silica nanocomposite materials prepared by sol–gel process
Polyacrylate/silica nanocomposite was prepared by sol–gel process via in situ emulsion polymerization. The influence of the synthetic conditions, such as the ratio of different monomers and the contents of tetraethoxysilane (TEOS), c-methacryloxypropyltrimethoxysilane (Z-6030), diethanolamine (DAM) and ammonium persulfate (APS) on the physical mechanical properties of polyacrylate/silica nanoco...
متن کاملHybrid polysaccharide-silica nanocomposites prepared by the sol-gel technique.
New monolithic nanocomposite silica biomaterials were synthesized on the basis of various natural polysaccharides and recently introduced completely water-soluble precursor tetrakis(2-hydroxyethyl) orthosilicate. The sol-gel processes were performed in aqueous solutions without the addition of organic solvents and catalysts. The silica polymerization was promoted by the polysaccharides through ...
متن کاملThermal Conductivity of a Nanoscale Yttrium Iron Garnet Thin-Film Prepared by the Sol-Gel Process
The thermal conductivity of a nanoscale yttrium iron garnet (Y₃Fe₅O12, YIG) thin-film prepared by a sol-gel method was evaluated using the ultrafast pump-probe technique in the present study. The thermoreflectance change on the surface of a 250 nm thick YIG film, induced by the irradiation of femtosecond laser pulses, was measured, and curve fitting of a numerical solution for the transient hea...
متن کاملZnO films prepared by modified sol-gel technique
Zinc oxide films with different thicknesses have been synthesized by modified sol-gel technique. The films are polycrystalline in nature with average grain size between 32 and 57 nm. The thicker films are less strained than the thinner ones. The optical band gap of the films is ~ 3.22 eV. PL spectra are dominated by a strong luminescence peak at ~387 nm followed by a low intensity peak ~469 nm....
متن کاملCharacterization of Ito Thin Films Prepared by Spinning Deposition Starting from a Sol-gel Process
ITO thin films were deposited by spin coating method starting from indium and tin propoxide in the frame of a sol-gel process. Films with the thickness corresponding to 68 nm for one layer deposition were produced and characterized by X-ray diffraction, transmission electron microscopy and infrared reflection spectroscopy. Low conductivity polycrystalline films exhibiting cubical structure (bix...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Sol-Gel Science and Technology
سال: 1997
ISSN: 0928-0707,1573-4846
DOI: 10.1007/bf02436924