ELECTRODEPOSITION OF COPPER POWDER FROM MIXTURE SULPHATE –CHLORIDE ACIDIC SOLUTION
نویسندگان
چکیده
منابع مشابه
Effect of Non-aqueous Solvents on the Rate of Production of Copper Powder from Copper Sulphate Solution by Cementation on Stationary Zinc Sheet and Rotating Zinc Cylinder
The rate of copper II/zinc cementation from copper sulphate solutions in the absence and in the presence of methanol (CH3OH) and dimethyl sulphoxide (DMSO) has been studied and the reaction was found to follow first-order kinetics. The influence of several parameters on the course of the reaction, such as cylinder rotation speed, initial concentration of Cu ions, temperature and concentration o...
متن کاملCopper Electrodeposition from a Water-Containing Choline Chloride Based Deep Eutectic Solvent
This study investigated the effect of water on the physical and electrochemical properties of a choline chloride deep eutectic solvent (DES). Physical and electrochemical measurements were performed on the DES containing varying amounts of water. When the water content was increased from 1% to 15 wt%, the viscosity and density declined while the conductivity increased significantly. Similarly, ...
متن کاملPulsed Electrodeposition of Copper
Pulsed electrolysis of copper has been systematically investigated by electrodepositing copper from a copper sulfate bath. Pulse duty cycles of 5 to 80 percent, at frequencies from 10 to 100 Hz with current densities ranging from 2.5 to 7.5 A/dm2 were employed. The appearance of Hull Cell panels with both direct current and pulsed current was recorded. The influence of pulsed current on current...
متن کاملPrecipitation of reactive aluminium hydroxide from an acidic aluminium sulphate solution by addition of sodium hydroxide
The goal of the present thesis was to study the possibilities of producing an aluminium hydroxide, which would easily dissolve in hydrochloric acid. Furthermore, the product should be easy to dewater. In the experiments, which were made batch-wise, a 50% sodium hydroxide was used to accomplish the precipitation. The precipitation of aluminium hydroxide is a dynamic process that depends on many ...
متن کاملExperimental Investigation of Effective Parameters at Laser Sintering the Mixture of Iron and Copper Powder
Optimization of process parameter is one of the ideal goals in laser sintering. The results of this process were measured as output parameters like: density, micro hardening, macro hardening, tension, roughness, stiffness, balling. In this paper, the influence of input parameter such as laser power, scan speed, material powder and etc are surveyed on output parameter like balling affection and ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: THE IRAQI JOURNAL FOR MECHANICAL AND MATERIALS ENGINEERING
سال: 2018
ISSN: 2313-3783,1819-2076
DOI: 10.32852/iqjfmme.v18i3.182