Electrodeposition of Sn-Ag Alloy with a Non-Cyanide Bath
نویسندگان
چکیده
منابع مشابه
Electrodeposition and Characterization of Sn-Zn Alloy Coatings from Sulfate Based Baths
Tin-Zinc alloy coatings have many applications because of their unique properties such as corrosion resistance, solderability and flexibility. In this study, the effect of current density, temperature and pH on chemical composition, cathodic current efficiency, morphology and structures of the coatings was investigated. The results illustrated that, at low current densities (<0.5 mA/cm2), the c...
متن کاملExperimental and theoretical evidence of a highly ordered two-dimensional Sn/Ag alloy on Si111.
The existence of a highly ordered, two-dimensional, Sn/Ag alloy on Si(111) is reported in this study. We present detailed atomic and electronic structures of the one atomic layer thick alloy, exhibiting a 2 × 2 periodicity. The electronic structure is metallic due to a free-electron-like surface band dispersing across the Fermi level. By electron doping, the electronic structure can be converte...
متن کاملMirror-Bright Silver Plating from a Cyanide-Free Bath
ilver has good electric conductivity and solderability and possesses S excellent electric characteristics as a contact and is thus widely used for plating electronic industrial parts. A cyanide plating bath is most often used, but the cyanide compounds have strong toxicity and a large amount of the cost is rxpkd for securing safe working conditions and waste treatment. Because of this, many cya...
متن کاملZinc Alloy Electrodeposition for Corrosion Protection
t is known that the protective value of zinc is partially a result of its ability to form a protective film when plated on a base metal, such as steel. The zinc is sacrificial and corrodes I preferentially to protectthe steel. Although pure zinc coating provides some degree of protection for the substrate, in a severe corrosion environment, zinc is consumed rapidly. For this reason, it is usual...
متن کاملCreep Behavior of a Sn-Ag-Bi Pb-Free Solder
Compression creep tests were performed on the ternary 91.84Sn-3.33Ag-4.83Bi (wt.%, abbreviated Sn-Ag-Bi) Pb-free alloy. The test temperatures were: −25 °C, 25 °C, 75 °C, 125 °C, and 160 °C (± 0.5 °C). Four loads were used at the two lowest temperatures and five at the higher temperatures. The specimens were tested in the as-fabricated condition or after having been subjected to one of two air a...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Denki Kagaku oyobi Kogyo Butsuri Kagaku
سال: 1997
ISSN: 0366-9297,2434-2556
DOI: 10.5796/kogyobutsurikagaku.65.1097