Electroforming technology for nameplates.
نویسندگان
چکیده
منابع مشابه
Nickel Plating and Electroforming
The material presented in this publication has been prepared for the general information of the reader and should not be used or relied on for specific applications without first securing competent advice. The Nickel Development Institute, its members, staff and consultants do not represent or warrant its suitability for any general or specific use and assume no liability or responsibility of a...
متن کاملECF micropump fabricated by electroforming with novel self-aligned micro-molding technology
This paper proposes and presents a novel ECF (electro-conjugate fluid) micropump with TPSEs (triangular prism and slit electrode pair) fabricated by electroforming process using newly developed self-aligned micro molds. ECF is a kind of functional and dielectric fluid. ECF micropump is based on the principle of ECF jet, which is a powerful and active jet flow generated between electrodes immerg...
متن کاملCharacterization of electroforming-free titanium dioxide memristors
Metal-insulator-metal (MIM) structures based on titanium dioxide have demonstrated reversible and non-volatile resistance-switching behavior and have been identified with the concept of the memristor. Microphysical studies suggest that the development of sub-oxide phases in the material drives the resistance changes. The creation of these phases, however, has a number of negative effects such a...
متن کاملThe mechanism of electroforming of metal oxide memristive switches.
Metal and semiconductor oxides are ubiquitous electronic materials. Normally insulating, oxides can change behavior under high electric fields--through 'electroforming' or 'breakdown'--critically affecting CMOS (complementary metal-oxide-semiconductor) logic, DRAM (dynamic random access memory) and flash memory, and tunnel barrier oxides. An initial irreversible electroforming process has been ...
متن کاملElectroforming Process in Metal-Oxide-Polymer Resistive Switching Memories
Electroforming of an Al/Al2O3/polymer/Al resistive switching diode is reported. Electroforming is a dielectric soft-breakdown mechanism leading to hysteretic current– voltage characteristics and non–volatile memory behavior. Electron trapping occurs at early stages of electroforming. Trapping is physically located at the oxide/polymer interface. The detrapping kinetics is faster under reverse b...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Jitsumu Hyomen Gijutsu
سال: 1988
ISSN: 1884-3417,0368-2358
DOI: 10.4139/sfj1970.35.400