Electroless coating of carbon nanotube/graphene nanoplatelets for reinforcing FeCo alloy
نویسندگان
چکیده
منابع مشابه
THE STUDY OF ELECTROLESS COATING OF NICKEL ON CARBON FIBERS
The continuity and thickness of the coating layer, are the most important factors in wetting properties and strength of carbon fibers. These factors are crucial in the quality of metal matrix composites made with carbon fibers. In this research the Polyacrylonitrail base carbon fibers have been nickel coated with 0.2, 0.5, 0.8 and 11 ,u in thickness, by the electroless method. The effect of the...
متن کاملNi-B Coating Production on Magnesium Alloy by Electroless Deposition
The use of magnesium alloys is limited due to their susceptibility to corrosion although they have many attractive physical and mechanical properties. To increase mechanical and corrosion properties of these alloys, many deposition method and coating types are used. Electroless Ni–B coatings have received considerable interest recently due to its unique properties such as cost-effectiveness, th...
متن کاملElectroless Nickel Plating on Magnesium Alloy
he inherent lightness and good strength-to-weight ratio of T magnesium has focused attention on increasing applications in aerospace and allied fields. Its density is two thirds that of aluminum-a conventional structure material for aerospace. Magnesium has one drawback: It is prone to atmospheric corrosion. Further, because of its high chemical affinity for aqueous solutions, it is categorized...
متن کاملElectroless Co–P-Carbon Nanotube composite coating to enhance magnetic properties of grain-oriented electrical steel
The effect of Co–P-CNT coating on the magnetic properties of grain oriented electrical steel was investigated. To analyse the coating, Raman spectroscopy, Superconducting QUantum Interference Device (SQUID), single strip testing, Scanning Electron Microscopy (SEM) and talysurf surface profilometry were performed. Raman spectra showed the D and G band which corroborates the presence of Multi-Wal...
متن کاملCarbon nanotubes reinforced electrospun chitosan nanocomposite coating on anodized AZ31 magnesium alloy
Chitosan based nanofibers containing carbon nanotubes were applied on AZ31 magnesium alloy via electrospinning. The magnesium substrate was initially anodized in a NaOH solution in order to improve the adhesion between the coating and substrate. Electrospinning parameters were optimized and homogenous nanofibers composite coatings were produced. Addition of carbon nanotubes reduced the size of ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Periodicals of Engineering and Natural Sciences (PEN)
سال: 2019
ISSN: 2303-4521
DOI: 10.21533/pen.v7i4.952