Electroless Pattern Copper Plating on PET Film Using Nano-Dispersion of Polypyrrole
نویسندگان
چکیده
منابع مشابه
Process analysis of electroless copper plating for AB5- type hydrogen storage alloy using support vector regression
Surface modification is an effective method to improve the electrochemical property of hydrogen storage alloy. In order to investigate the influence of process factors of electroless copper (Cu) plating for AB5-type hydrogen storage alloy on Cu coating mass, a novel modeling approach, support vector regression (SVR) combined with particle swarm optimization (PSO), was proposed to construct a ma...
متن کاملElectroless Nickel Plating on Magnesium Alloy
he inherent lightness and good strength-to-weight ratio of T magnesium has focused attention on increasing applications in aerospace and allied fields. Its density is two thirds that of aluminum-a conventional structure material for aerospace. Magnesium has one drawback: It is prone to atmospheric corrosion. Further, because of its high chemical affinity for aqueous solutions, it is categorized...
متن کاملPreparation of the Copper Coatings on Fe Powder by Electroless Plating Technique
The electroless coating technique is one of the elegant methods available for the production of protective coatings on surface. Our study has been aimed at the conditions of the electroless deposition of copper coating onto the iron powder particles from sulphate electrolyte. The course of the electroless process depends on the composition and pH of the electrolyte as well as on the size and co...
متن کاملElectroless Nickel Plating with Hypophosphite
In the previous chapter, the components of electroless nickel plating baths were discussed from the viewpoint of the function each performs in the bath, with little attention paid to their effect on the plating process. The metal and the electron source (the reducing agent) are consumed in the electroless plating reaction and so their concentrations in the bath are continuously decreasing. Ther...
متن کاملElectroless Nickel Plating: Bath Control
In this paper, bath control is proposed for the electroless nickel plating through holes board process. The main parameters of the product (board) – thickness of the plating film and phosphorous content – are stabilized at constant levels using optimal tracking control. The set point for control is calculated from the model in dependence on the current state of the process. The pH-index and nic...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of The Japan Institute of Electronics Packaging
سال: 2013
ISSN: 1343-9677,1884-121X
DOI: 10.5104/jiep.16.152