Electrolysis Free Micro EDM in Water Using Electrostatic Induction Feeding Method
نویسندگان
چکیده
منابع مشابه
A Review of Micro - EDM
There is a huge demand in the production of microstructures by a non-traditional method which is known as Micro-EDM. Micro-EDM process is based on the thermoelectric energy between the workpiece and an electrode. Micro-EDM is a newly developed method to produce micro-parts which in the range of 50 μm -100 μm. Micro-EDM is an efficient machining process for the fabrication of a micro-metal hole ...
متن کاملAn improved method of water electrolysis – effect of complexing agent
The present work investigates the efficiency of an alkaline water electrolysis process in the presence of a complexing agent like citric acid (CA) when added directly into the electrolyte during the electrolytic process. High surface area nickel electrodes prepared by electrodeposition technique were used as the electrode to evaluate the efficiency of the oxygen evolution reaction (OER) by the ...
متن کاملMICRO-EDM FOR MICRO-CHANNEL FABRICATION ON NONCONDUCTIVE ZrO2 CERAMIC
In this study, microelectro-discharge (micro-ED) milling of nonconductive ZrO2ceramicsis investigated using a Cu tool electrode in kerosene dielectric. An adhesive Cu foil is firmly attached on the workpiece to initiate the sparks. After the machining of Cu foil, an electrically conductive carbonic layer is formed on the ceramic workpiece disassociating the kerosene dielectric, which allows mic...
متن کاملUsing Taguchi Method to Optimize Recovery of Bismuth by Electrolysis
This paper presents a methodology, based on the taguchi parameter design approach, for the optimization of process parameters for bismuth recovery from aqueous solutions. The process parameters considered are [Bi3+], [NaCl], temperature, and cathodic current density. In addition, cell voltage and current efficiency as two responses have been considered. An orthogonal array L9, the signal-to-noi...
متن کاملStability Analysis in Parametrically Excited Electrostatic Torsional Micro-actuators
This paper addresses the static and dynamic stabilities of a parametrically excited torsional micro-actuator. The system is composed of a rectangular micro-mirror symmetrically suspended between two electrodes and acted upon by a steady (dc ) while simultaneously superimposed to an (ac ) voltage. First, the stability of the system subjected to a quasi-statically applied (dc ) voltage is investi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Advanced Mechanical Design, Systems, and Manufacturing
سال: 2012
ISSN: 1881-3054
DOI: 10.1299/jamdsm.6.800