Electromagnetic field simulation and crack analysis of electromagnetic forming of Magnesium alloy tube
نویسندگان
چکیده
منابع مشابه
Simulation Models of the Electromagnetic Forming Process
Suitable simulation approaches for the preliminary investigation of the electromagnetic metal forming process are presented. For this purpose an uncoupled (loose-coupled) simulation model is compared to a more rigorous sequential-coupled approach. As shown by examples, the connection between electromagnetic field and spatiotemporal evolution of the deformation of the workpiece cannot always be ...
متن کاملSHEET ELECTROMAGNETIC FORMING USING CONVEX PUNCH INSTEAD OF CONVAVE DIE
High speed and absence of a precise control over pressure distribution confine sheet Electromagnetic Forming into a die to simple shapes having shallow depth. It is possible to reach a higher depth by using a convex punch instead of a concave die. In this study, sheet Electromagnetic Forming on a punch and sheet Electromagnetic Forming into a die are investigated. The electromagnetic part of th...
متن کاملsimulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
Electromagnetic Field Simulation in Technical Diagnostics
Abstract. An information diagnostic system is currently being developed. The system is based on electromagnetic non-destructive testing and uses a matrix magnetic converter for revealing flaws and forecasting the reliability of machines and mechanisms. The considered algorithm, which analyses magnetic nondestructive testing results, uses a dynamic type matrix magnetic transducer. To estimate cr...
متن کاملfabrication of new ion sensitive field effect transistors (isfet) based on modification of junction-fet for analysis of hydronium, potassium and hydrazinium ions
a novel and ultra low cost isfet electrode and measurement system was designed for isfet application and detection of hydronium, hydrazinium and potassium ions. also, a measuring setup containing appropriate circuits, suitable analyzer (advantech board), de noise reduction elements, cooling system and pc was used for controlling the isfet electrode and various characteristic measurements. the t...
ذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Brazilian Society of Mechanical Sciences and Engineering
سال: 2011
ISSN: 1678-5878
DOI: 10.1590/s1678-58782011000100006