Electron beam irradiation treatment of textiles materials: a review

نویسندگان

چکیده

Abstract Electron beam irradiation technology has gained more attention as it appears to be a promising economically and environmentally sustainable alternative traditional wet-chemical processing. It is an advanced approach that clean, solvent-free, time-saving, ecologically benign with acceptable handling operation properties. This review provides study of the latest literature on electron surface modification textile. Considerable emphasis also placed most novel applications such functionalization textile materials, which leads development techniques or revolutionary materials soon. Graphical abstract

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Electron Beam Irradiation of Cellulosic Materials—Opportunities and Limitations

The irradiation of pulp is of interest from different perspectives. Mainly it is required when a modification of cellulose is needed. Irradiation could bring many advantages, such as chemical savings and, therefore, cost savings and a reduction in environmental pollutants. In this account, pulp and dissociated celluloses were analyzed before and after irradiation by electron beaming. The focus ...

متن کامل

Treatment of Synthetic Textile Wastewater by Combination of Coagulation/Flocculation Process and Electron Beam Irradiation

Introduction: Textile wastewaters from dyeing and finishing processes are heavily polluted with dyes, textile auxiliaries and chemicals and have a broad range of pH, high COD concentration and suspended particles. In this study, the efficiency of color and turbidity removal from synthetic textile wastewater samples were investigated by combined process of coagulation/ flocculation and electron ...

متن کامل

Electron Beam Irradiation Applications

The irradiation of materials with electron beams or X rays is used extensively to enhance or modify their physical, chemical or biological properties. These electron beam “irradiators” cover a very wide range of accelerators technology, beam current and energies to produce a wide variety of products, mostly with polymers. They also are used for curing ink, coatings, and adhesives as well as for...

متن کامل

Electron beam ablation of materials

The channelspark, a low accelerating voltage, high current electron beam accelerator, has been used for ablation of materials applied to thin film deposition. The channelspark operates at accelerating voltages of 10 to 20 kV with ;1500 A beam currents. The electron beam ionizes a low-pressure gas fill ~10–20 mTorr Ar or N2) to compensate its own space charge, allowing ion focused transport. Abl...

متن کامل

Electron beam irradiation of dental composites.

OBJECTIVES Electron beam irradiation can be used to influence the mechanical properties of polymers. It was the aim of this study to investigate whether dental composites can benefit from irradiation in order to achieve increased fracture toughness, work of fracture, hardness or less wear. METHODS Two hundred rectangular specimens of five veneering composites were electron beam irradiated wit...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Journal of Polymer Research

سال: 2022

ISSN: ['1572-8935', '1022-9760']

DOI: https://doi.org/10.1007/s10965-022-02952-4