Electronic structure and possible martensitic transformation in Ni2FeIn alloy

Martensitic transformation in Pd-rich Fe–Pd–Pt alloy

The fct martensite morphology and the martensite transformation temperatures are examined for Pd-rich Fe–Pd–Pt alloys, which have the composition of Fe–(xPdyPt)xþy1⁄430 at:%. The replacement of Pd with Pt content causes solution hardening. The shape memory effects are investigated below the Af temperatures. Above the Af temperatures, the stress induced martensite in several grains completely di...

Magnetic and magneto-transport studies of substrateeffect on the martensitic transformation in a NiMnInshape memory alloy

Effects of Alloying Elements on Martensitic Transformation Behavior and Damping Capacity in Fe-17Mn Alloy

Effect of carbon and Ti on 7-s martensitic transformation behavior and damping capacity has been investigated in an Fe-17Mn alloy. The suppressive force of carbon against 7-s transformation increases linearly with an increase in carbon content, lowering M, temperature and volume fraction of s martensite. Carbon deteriorates damping capacity by reducing the area of y l e interfaces and by decrea...

Martensitic Transformation and Elastic Constants

Martensitic transformation and magnetic properties of Heusler alloy Ni–Fe–Ga ribbon

The martensitic transformation and magnetic properties of ferromagnetic shape memory alloy Ni50+ xFe25− xGa25 (x = −1, 0, 1, 2, 3, 4) ribbons have been systematically studied. It has been found that with the increase of Ni concentration, the martensitic transformation temperature increases, but the Curie temperature decreases. Both the two-step thermally induced structural transformation and th...