Electroplated Ni-CNT Nanocomposite for Micromechanical Resonator Applications
نویسندگان
چکیده
منابع مشابه
Young’s modulus of electroplated Ni thin film for MEMS applications
The Young’s modulus of an electroplated nickel (Ni) thin film suitable for microelectromechanical applications has been investigated as a function of process variables: the plating temperature and current density. It was found that the Young’s modulus is approximately 205 GPa at plating temperatures less than 60 jC, close to that of bulk Ni, but drastically drops to approximately 100 GPa at 80 ...
متن کاملMicromechanical Resonator Oscillator
A 10-MHz series resonant micromechanical resonator oscil-lator has been demonstrated using a custom-designed, single-stage, zero-phase-shift sustaining amplifier together with a clamped-clamped beam micromechanical resonator, designed with a relatively large width of 40 µm to achieve substantially lower series motional resistance R x and higher power handling than previous such devices. Using a...
متن کاملCMOS Micromechanical Resonator Oscillator
A completely monolithic high-Q oscillator, fabricated via a combined CMOS plus surface micromachining technology, is described, for which the oscillation frequency is controlled by a polysilicon micromechanical resonator to achieve stability and phase noise performance comparable to those of quartz crystal oscillators. It is shown that the closed-loop, steady-state oscillation amplitude of this...
متن کاملEffect of CNT Addition on the Characteristics of Cu-Ni/CNT Nanocomposite
In this study, Cu50-Ni50 alloy were synthesized by mechanical alloying. The alloy was then reinforced by dispersion of multiwalled carbon nanotubes using a planetary high energy ball mill. X-ray diffraction, scanning electron microscopy and vibrating sample magnetometer were used to evaluate the effects of CNT addition on the characteristics of the nanocomposites. XRD results of Cu-Ni sample sh...
متن کاملEffects of Process Conditions on Properties of Electroplated Ni Thin Films for Microsystem Applications
Effects of Process Conditions on Properties of Electroplated Ni Thin Films for Microsystem Applications J. K. Luo, M. Pritschow, A. J. Flewitt, S. M. Spearing,* N. A. Fleck, and W. I. Milne Department of Engineering, University of Cambridge, Cambridge CB3 0FA, United Kingdom Institute for Microelectronics Stuttgart, 70569 Stuttgart, Germany School of Engineering Science, University of Southampt...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IEEE Electron Device Letters
سال: 2012
ISSN: 0741-3106,1558-0563
DOI: 10.1109/led.2012.2190131