Electrospun TiO2 nanofibre-based gas sensors fabricated by AC electrophoresis deposition
نویسندگان
چکیده
منابع مشابه
Gas Sensors Based on Electrospun Nanofibers
Nanofibers fabricated via electrospinning have specific surface approximately one to two orders of the magnitude larger than flat films, making them excellent candidates for potential applications in sensors. This review is an attempt to give an overview on gas sensors using electrospun nanofibers comprising polyelectrolytes, conducting polymer composites, and semiconductors based on various se...
متن کاملSensing Performance of Precisely Ordered TiO2 Nanowire Gas Sensors Fabricated by Electron-Beam Lithography
In this study, electron beam lithography, rather than the most popular method, chemical synthesis, is used to construct periodical TiO(2) nanowires for a gas sensor with both robust and rapid performance. The effects of temperature on the sensing response and reaction time are analyzed at various operation temperatures ranging from 200 to 350 °C. At the optimized temperature of 300 °C, the pro...
متن کاملElectrospun TiO2 nanofibers for gas sensing applications
Nanostructured TiO2 has attracted much attention for a variety of applications including photocatalysts, electrodes for water photolysis, dye-sensitized solar cells, and gas sensors. In this work we report on TiO2 fiber mats for use in gas sensors demonstrating exceptionally high sensitivity to NO2, a toxic gas responsible for acid rain and other air pollution effects, and high sensitivity to H...
متن کاملAC Electrophoresis; Deposition of Ceramic Nanaoparticles on In-plane Electrodes at Low Frequencies (RESEARCH NOTE)
Deposition of ceramic nanoparticles (dispersed in a non-aqueous suspension) on in-plane electrodes and under the influence of AC electric fields in the frequency range of 0.01 Hz - 10 kHz is investigated. Analysis of the particle response to the applied field is a difficult task due to the mutual effect of electric- and hydrodynamic force which are present in the system. In this work, however, ...
متن کاملThick Film Deposition of Carbon Nanotubes by Alternating Electrophoresis
Electrophoretic deposition of carbon nanotubes (CNTs) using alternating current electric fields (0.01-1000 Hz) is reported. Pure acetone was used as suspending medium. Two parallel gold electrodes were used as depositing substrate. The effect of depositing parameters such as frequency and three waveforms (sinusoidal, rectangular and triangular) on deposit yield was investigated. According to ou...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Bulletin of Materials Science
سال: 2015
ISSN: 0250-4707,0973-7669
DOI: 10.1007/s12034-014-0800-0