Electrostatic modeling of cavities inside linear actuators
نویسندگان
چکیده
منابع مشابه
Modeling and Evaluation of Linear Oscillating Actuators
The operation of linear oscillating system is complicated, involving system nonlinearities of both actuator and load, and variations of driving frequency in order to track the mechanical resonance. In this paper, both analytical and state-variable modeling techniques are used to investigate the influence of actuator parameters, such as back-emf/thrust force coefficient and cogging force, on the...
متن کاملElectrostatic Actuators with Intrinsic Stress Gradient II. Performance and Modeling
Electrostatic actuators are used as voltage-controlled oscillators or resonators in high frequency applications. The change in deflection of a cantilever beam due to an applied voltage leads to change in capacitance between the plates of the beam. However, the range of operation of these devices is limited due to the nonlinear nature of the applied electrostatic forces as the cantilever beam mo...
متن کاملStability Analysis in Parametrically Excited Electrostatic Torsional Micro-actuators
This paper addresses the static and dynamic stabilities of a parametrically excited torsional micro-actuator. The system is composed of a rectangular micro-mirror symmetrically suspended between two electrodes and acted upon by a steady (dc ) while simultaneously superimposed to an (ac ) voltage. First, the stability of the system subjected to a quasi-statically applied (dc ) voltage is investi...
متن کاملDynamics of Polysilicon Parallel-plate Electrostatic Actuators
The response of a polysilicon parallel-plate electrostatic actuator to AC signals at diierent bias voltages has been measured with a laser interferometer. Using microhinges, large plates (with areas from 100m 2 to 0:1mm 2) with long thin support beams (such as 60031:5m 3) are rotated oo the surface of the substrate to form a parallel-plate capacitor. Fabricated structures having 100m gaps can b...
متن کاملDesign of Large Deflection Electrostatic Actuators
Electrostatic, comb-drive actuators have been designed for applications requiring displacements of up to 150 μm in less than 1 msec. A nonlinear model of the actuator relates the resonant frequency and the maximum stable deflection to the actuator dimensions. A suite of experiments that were carried out on DRIE, single-crystal silicon, comb-drive actuators confirm the validity of the model. Fou...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Physics: Conference Series
سال: 2015
ISSN: 1742-6588,1742-6596
DOI: 10.1088/1742-6596/646/1/012050