Elutriation of fines from binary particle mixtures in bubbling fluidized bed cold model
نویسندگان
چکیده
منابع مشابه
Particle Injection and Mixing Experiments in a One Quarter Scale Model Bubbling Fluidized Bed
One significant factor in the operation of a fluidized bed combustor is the manner in which coal particles disperse and mix with the bed material upon entering the bed. A thermal tracing technique was used to study the mixing characteristics in a 1/4 scale model of a pressurized bubbling fluidized bed combustor. Particles cooled by liquid nitrogen are injected into the bed in the same way that ...
متن کاملGas-solid Turbulent Flow in a Circulating Fluidized Bed Riser; Numerical Study of Binary Particle Mixtures
A numerical simulation was performed on a turbulent gas-particle multi-phase flow in a circulating fluidized bed riser based on a hard-sphere discrete particle model (DPM) for the particle phase and the Navier-Stokes equations for the gas phase. The sub-grid scale stresses (SGS) were modeled with the SGS model proposed by Vreman (2004). The model enables the calculation of an arbitrary particle...
متن کاملVerification of the Importance of Introducing Particle Size Distributions to Bubbling Fluidized Bed Simulations
Fluidized beds are widely used in industrial operations due to their ability to give good mixing and a high contact area between the phases. The excellent controlling ability of temperature allows good operating conditions for solid catalyzed gas phase reactions and also the ease of the design. Powders used in industrial uidized beds have a particle size distribution, and the particle size dis...
متن کاملX-ray tomography of a fluidized bed Effect of pressure and fines on bubbles in a fluidized bed
Using a fast X-ray tomography setup measurements have been done on a 25 cm diameter f luidized bed of Geldart B pow^der and a 24 cm bed of Geldart A powder. The average bubble sizes have been determined over a measurement period of 60 seconds. The resolution of this setup is about 4.5 m m per pixel at a rate of 250 reconstructions per second. I t is possible to detect bubbles as small as 2.5 cm...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Powder Technology
سال: 2017
ISSN: 0032-5910
DOI: 10.1016/j.powtec.2016.09.046