EM Specimen Preparation of Nanoparticles Using Ultrasonic Spray Technique
نویسندگان
چکیده
منابع مشابه
Preparation of Structured Polymer Composites Using an Ultrasonic Focusing Technique
This research uses ultrasonic standing waves to arrange sub-micron size particles within polymeric materials in layered or stratified configurations. Such composites have the potential to exhibit unique mechanical and transport properties. Through the combination of ultrasonics, polymer science, and particle science, it is hoped that a range of advanced thinfilm materials can be developed as ba...
متن کاملSilver Nanoparticles from Ultrasonic Spray Pyrolysis of Aqueous Silver Nitrate
Silver particles less than 20 nm in diameter were synthesized by pyrolysis of an ultrasonically atomized spray of highly dilute aqueous silver nitrate solution at temperatures above 650◦C and below the melting point of silver. Feed solution concentration and ultrasound power applied to the atomizer were found to have a significant impact on the particle size of the silver nanoparticles. Average...
متن کاملUltrasonic method for the preparation of organic porphyrin nanoparticles.
We report the synthesis and optical properties of organic porphyrin nanoparticles with narrow size distribution and good dispersibility. Nanoparticles were produced by a combination of precipitation and sonication, termed the "ultrasonic method". The resulting [tetrakis(para-chlorophenyl)porphyrin]TClPP nanoparticles were stable in solution without precipitation for at least 30 days. No self ag...
متن کاملPreparation of ZnS nanoparticles by ultrasonic radiation method
Zn nanoparticles were prepared by the inert-gas evaporation technique with induction heating method. Asprepared Zn particles were mixed with Na2S solution. ZnS nanoparticles were synthesized under ultrasonic radiation. They were studied by X-ray diffraction (XRD), transmission electron microscopy (TEM), UV spectrophotometry, and X-ray photoelectron spectrometry (XPS). XRD revealed that the ZnS ...
متن کاملPreparation and growth of SnS thin film deposited by spray pyrolysis technique
In this paper thin films of tin sulfide (SnS) were deposited on the glass substrates using spray pyrolysis method with the substrate temperatures in the range of 400–600℃, keeping the other deposition parameters constant. In this work the characteristic of SnS thin films investigated. The XRD pattern and optical transmittance of thin films also are discussed. With the change in concen...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Microscopy and Microanalysis
سال: 2006
ISSN: 1431-9276,1435-8115
DOI: 10.1017/s1431927606069182