Embedded Fibre Bragg Grating Sensor Response Model: Crack Growing Detection in Fibre Reinforced Plastic Materials

نویسندگان
چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Crack Detection in Fibre Reinforced Plastic Structures Using Embedded Fibre Bragg Grating Sensors: Theory, Model Development and Experimental Validation

In a fibre-reinforced polymer (FRP) structure designed using the emerging damage tolerance and structural health monitoring philosophy, sensors and models that describe crack propagation will enable a structure to operate despite the presence of damage by fully exploiting the material's mechanical properties. When applying this concept to different structures, sensor systems and damage types, a...

متن کامل

Locally Pressed Fibre Bragg Grating Pressure Sensor

A spectral-hole created by locally pressing a fibre Bragg grating (FBG)s exhibited a wavelength-shift within the FBG bandwidth. A sensitivity of 74.3 pm/(N/mm) was obtained for pressure applied along the slow axis of a high birefringence fibre. ©2006 Optical Society of America OCIS codes: (060.2370) Fiber optics sensors; (060.2420) Fibers, polarization-maintaining

متن کامل

Machining of Fibre Reinforced Plastic Composite Materials

Fibre reinforced plastic composite materials are difficult to machine because of the anisotropy and inhomogeneity characterizing their microstructure and the abrasiveness of their reinforcement components. During machining, very rapid cutting tool wear development is experienced, and surface integrity damage is often produced in the machined parts. An accurate selection of the proper tool and m...

متن کامل

Piezoelectric-modulated optical fibre Bragg grating high-voltage sensor

A high-voltage sensor was developed by driving optical fibre Bragg gratings, mechanically fixed along the radial direction, with a conventional piezoelectric disc. A wavelength shift modulation is obtained as a result of the converse piezoelectric effect. The measured output signal is linear. The voltage upper limit depends on the type and thickness of the piezoceramic. A sensor built with a di...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Journal of Physics: Conference Series

سال: 2015

ISSN: 1742-6588,1742-6596

DOI: 10.1088/1742-6596/628/1/012115