Embrittlement Due to Excess Heat Input into Friction Stir Processed 7075 Alloy
نویسندگان
چکیده
منابع مشابه
Effect of Post Heat Treatment on the Microstructure and Microhardness of Friction Stir Processed NiAl Bronze (NAB) Alloy
NiAl bronze (NAB) alloy is prepared by using friction stir processing (FSP) technique at a tool rotation rate of 1200 rpm and a traverse speed of 150 mm/min. A post heat treatment is performed at the temperature of 675 °C. The effect of heat treatment on the microstructure and microhardness is studied. The results show that the microstructure of the FSP NAB alloy consists of high density disloc...
متن کاملTHERMAL STABILITY OF FRICTION STIR PROCESSED ULTRAFINE GRAINED Al-Mg-Sc ALLOY
Two different aspects of the thermal stability of grains were studied – (i) thermal stability of grain structure evolution during friction stir processing (FSP), and (ii) thermal stability of grains after FSP. It was concluded that Al3(Sc,Zr) dispersoids are effective in limiting grain growth to ultrafine grained regime (UFG) by stabilizing the microstructure during FSP. The presence of these d...
متن کاملIn Vitro Corrosion Study of Friction Stir Processed WE43 Magnesium Alloy in a Simulated Body Fluid
Corrosion behavior of friction stir processing (FSP) WE43 alloy in a simulated body fluid (SBF) was investigated. Micro-galvanic corrosion was the dominated corrosion behavior, and the corrosion resistance of FSP WE43 alloy was improved compared to the cast counterpart. Furthermore, due to the fine-grained and homogeneous microstructure, uniform corrosion morphology was observed on FSP WE43 all...
متن کاملInfluence of Process Parameters on Microstructure of Friction Stir Processed Mg AZ31 Alloy
Friction stir processing (FSP) has been developed on the principles of friction stir welding (FSW) as an effective and efficien new method for grain refinement and microstructural modification, providing intense plastic deformation as well as higher strain rates than other conventional severe plastic deformation methods. FSP produces an equiaxed homogeneous microstructure consisting of fine gra...
متن کاملThe Strength of Friction Stir Welded and Friction Stir Processed Aluminium Alloys
Local strength of friction stir (FS) welds and FS processed aluminium alloys in heat treatable aluminium alloys is dominated by precipitation hardening. Strengthening due to stored dislocations is generally limited to 40MPa, and grain size strengthening is generally less than 10MPa. Local crystallographic texture can cause yield strength variation on the order of 5%. Published models for streng...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials
سال: 2019
ISSN: 1996-1944
DOI: 10.3390/ma12020227