Embrittlement Mechanism on Tensile Fracture of 7075 Al Alloy with Friction Stir Process (FSP)
نویسندگان
چکیده
منابع مشابه
Effects of Process Parameters of Friction Stir Processing on Tensile Strength of AA6063 Aluminum Alloy
In this investigation, the effect of friction stir processing (FSP) parameters such as rotational speed, traverse speed and plunge depth on the tensile strength of AA6063 aluminum alloy was studied. The experiments were carried out as per response surface methodology parametric design concepts to study the influence of various combinations of process parameters. Statistical optimization techniq...
متن کاملTensile properties and fracture locations of friction-stir-welded joints of 2017-T351 aluminum alloy
Friction stir welding (FSW) is a new and promising welding process that can produce low-cost and high-quality joints of heat-treatable aluminum alloys because it does not need consumable filler materials and can eliminate some welding defects such as crack and porosity. In order to demonstrate the friction stir weldability of the 2017-T351 aluminum alloy and determine optimum welding parameters...
متن کاملEvaluation of fatigue behavior of cast and ultra-fine processed Al-7075 by using friction stir technique
This paper presents experimental results on the fatigue properties of the modified microstructure of cost Al-alloy 7075 via friction stir processing (FSP). The microstructural behavior was investigated by using optical microscope (OM). The grain size of cast FSP-ed at different locations was investigated via XRD. Uniaxial tensile and bending fatigue tests were carried out at room temperature o...
متن کاملEvaluation of fatigue behavior of cast and ultra-fine processed Al-7075 by using friction stir technique
This paper presents experimental results on the fatigue properties of the modified microstructure of cost Al-alloy 7075 via friction stir processing (FSP). The microstructural behavior was investigated by using optical microscope (OM). The grain size of cast FSP-ed at different locations was investigated via XRD. Uniaxial tensile and bending fatigue tests were carried out at room temperature o...
متن کاملPre-Treated Effect of Friction Stir Processing of Al Alloy 5052 on Vibration Fracture Behavior under Resonant Vibration
In this study, 5052 Al–Mg alloy was pre-treated and friction stir processing (FSP) was then performed on the specimens to explore the deformation resistance. The experimental results indicate that the FSP specimens not only had better tensile properties but also better vibration fracture resistance. It is significant that the tensile elongation and deformation resistance tended to increase as t...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: MATERIALS TRANSACTIONS
سال: 2011
ISSN: 1345-9678,1347-5320
DOI: 10.2320/matertrans.m2010315