EMI and Countermeasure for Electric Arc Furnace in Steelmaking.

نویسندگان

چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Recycling Evaluation of Mill Scale in Electric Arc Furnace

A considerable amount of mill scale is generated from steelmaking plants annually. Although some industries use it as raw material however, since it contains iron in the form of FeO, Fe2O3, and Fe3O4, it can be considered as a valuable metallurgical raw material for iron and steelmaking industry as well. Thus, the aim of this study was to evaluate the possibility, efficiency, and consequences o...

متن کامل

Electric Arc Furnace Slag and Blast Furnace Dust, Use for the Manufacture of Asphalt Concrete for Roads

This paper analyzes how feasible it is to use electric arc furnace slag as coarse aggregate, and blast furnace dust as fine aggregate in the manufacture of hot asphalt concrete for roads. Three mixtures were designed using the Ramcodes methodology, the M1 mixture of control with conventional materials, the M2 mixture replacing 50% and the M3 mixture replacing 100% of the conventional aggregates...

متن کامل

Vitrification of electric arc furnace dusts.

Electric arc furnace baghouse dust (EAFD), a waste by-product of the steelmaking process, contains the elements that are volatilized from the charge during the melting (Cr, Pb, Zn, Cu and Cd). The results of leaching tests show that the concentration of these elements exceeds the regulatory limits. Consequently, EAFD cannot be disposed of in ordinary landfill sites without stabilization of the ...

متن کامل

Dynamic Modeling of a Robot Manipulator for Opening the Tap Hole of an Electric Arc Furnace

The electric arc furnace (EAF) is used to produce high quality steel from steel scraps. The EAF uses plasma arc to generate heat for melting scarp or direct reduced iron (DRI). The liquid metal should be drained from the tap hole. Manual tapping operation of the EAF in the hot environment around the furnace is a potentially dangerous and time consuming task for the workers. Therefore, it is ess...

متن کامل

Optimisation of Metal Charge Material for Electric Arc Furnace

Steel has remained the most crucial of all structural materials. However, the steel production processes have changed over the years. Currently, due to the tendency of eliminating high energy consuming technologies, in both the international and domestic steel industry, liquid steel is manufactured in two basic aggregates: oxygen-blown converters and electric arc furnaces 1 . The development of...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: DENKI-SEIKO[ELECTRIC FURNACE STEEL]

سال: 1991

ISSN: 1883-4558,0011-8389

DOI: 10.4262/denkiseiko.62.190