Empirical modeling of high-intensity electron beam interaction with materials
نویسندگان
چکیده
منابع مشابه
Use in a High Intensity Electron Beam*
This paper describes a 650 mm long liquid hydrogen target constructed for use in the high intensity electron beam at the Stanford Linear Accelerator Center, (SLAC). The main design problem was to construct a target that would permit the heat deposited by the electron beam to be removed rapidly without boiling the hydrogen so as to maintain constant target density for optimum data taking. Design...
متن کاملInteraction of high intensity focused ultrasound with biological materials
This work is motivated by possible medical applications of focused ultrasound in minimally invasive treatment of a variety of disorders. The mechanical and thermal effects caused by high-frequency ultrasound in different material systems are calculated using a finite element based program called PZflex. The pressure distributions generated by plane as well as focused ultrasound beams are presen...
متن کاملElectron beam ablation of materials
The channelspark, a low accelerating voltage, high current electron beam accelerator, has been used for ablation of materials applied to thin film deposition. The channelspark operates at accelerating voltages of 10 to 20 kV with ;1500 A beam currents. The electron beam ionizes a low-pressure gas fill ~10–20 mTorr Ar or N2) to compensate its own space charge, allowing ion focused transport. Abl...
متن کاملStudy of relativistic electron beam production and transport in high-intensity laser interaction with a wire target by integrated LSP modeling
in high-intensity laser interaction with a wire target by integrated LSP modeling M. S. Wei, A. A. Solodov, J. Pasley, R. B. Stephens, D. R. Welch, and F. N. Beg Center for Energy Research, University of California at San Diego, La Jolla, California 92093, USA Fusion Science Center and Laboratory for Laser Energetics, University of Rochester, Rochester, New York 14623, USA General Atomics, San ...
متن کاملThe effect of high-energy electron beam on drawn and undrawn high density polyethylene fibers
HDPE monofilaments were obtained using different extruders and drawn by post-extruder equipments. After solidification, drawn and undrawn monofilaments (draw ratio 7:1) were irradiated with 10 MeV electron beams in air at room temperature at 25, 50, 75, 100 and 125 kGy dose ranges to induce a network structure. HDPE crosslinking was studied on the basis of gel content measurements. The fibers w...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Physics: Conference Series
سال: 2018
ISSN: 1742-6588,1742-6596
DOI: 10.1088/1742-6596/992/1/012015