EN 206 Conformity Testing for Concrete Strength in Compression
نویسندگان
چکیده
منابع مشابه
EVALUATION OF CALCULATION CORRELATION EFFICIENCY AS MENTIONED IN en 13791 IN ORDER TO DETERMINATION CONCRETE COMPRESSION STRENGTH BY NONDESTRUCTIVE TESTING
The paper presents evaluation of correlations for calculation of concrete compression strength using nondestructive testing parameters for both impact and ultrasonic pulse methods, as listed in EN 13791:2007. This standard indicates procedures relating to compression strength determination in construction and building elements. These procedures relate to compression strength evaluation based ei...
متن کاملPulse compression technique applied to ultrasonic nondestructive testing of concrete
The pulse compression technique is successfully and widely used in many fields for improving the signal to noise ratio (SNR); which is especially useful when the environment is noisy and the SNR is poor. Since high frequency ultrasound is strongly attenuated in concrete, only low frequency ultrasound can be used in ultrasonic nondestructive testing (NDT) of concrete. In this study the pulse com...
متن کاملFlexural Testing of High Strength Reinforced Concrete Beams Strengthened with CFRP Sheets
The objective of this study is to investigate the effectiveness of externally bonded CFRP sheets to increase the flexural strength of reinforced high strength concrete (HSC) beams. Four-point bending flexural tests to complete failure on six concrete beams, strengthened with different layouts of CFRP sheets were conducted. Three-dimensional nonlinear finite element (FE) models were adopted by A...
متن کاملNon-destructive Testing of Solid Brick Compression Strength in Structures
Solid burnt brick sized 290 × 140 × 65 mm or 303 × 145 × 70 mm respectively, represents one of most widespread brick building material, both structural and nonbearing ones, in Czech historical buildings. During their rebuilding and reconstruction, we frequently ask for brickwork material strength. Most exact method is to take test samples just from the construction and put them to trial neverth...
متن کاملEffect of the Concrete Strength on the Concrete-Steel Bond in Concrete Filled Steel Tubes
In this study, the concrete-steel bond strength of concrete filled cylindrical steel tubes has been experimentally investigated. 22 short, high strength and normal concrete filled circular steel tubes were tested. Push-out test was carried out as the common method to evaluate the bond carrying capacity. Four different concrete mixes were used in preparing the specimens. The steel tubes were w...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Procedia Engineering
سال: 2017
ISSN: 1877-7058
DOI: 10.1016/j.proeng.2017.01.330