Energy Absorption Capacity of Concrete-Filled Steel Tube Slender Columns with Different Aspect Ratios
نویسندگان
چکیده
The present paper examines the energy absorption capacity of concrete-filled steel tube slender (CFTS) columns having different aspect ratios. CFTS are nonlinearly analysed employing finite element software ABAQUS. In order to validate simulation columns, an experimentally tested column is simulated and its achieved result compared with that column. Since it concluded there a good agreement between obtained results from experimental test, validation then established. thereafter developed using ratios 6, 10, 13 also considering following parameters: load eccentricities, cross-sectional shapes, thicknesses. analyses. effects above-mentioned parameters on evaluated. From results, can be decreased by increase eccentricity or ratio. Further, circular greater than rectangular square columns. However, higher accomplished for Additionally, increasing thickness leads Typical failure modes assessed.
منابع مشابه
Behavior of FRP-Confined Concrete-Filled Steel Tube Columns
This paper presents the results of an experimental study into the behavior of concrete-filled steel tube columns confined by fiber-reinforced polymer (FRP). Eleven columns were tested to investigate the effects of the FRP layer number, the thickness of the steel tube and concrete strength on their load capacity and axial deformation capacity. The experimental results indicated that the FRP wrap...
متن کاملresearch behavior of concrete filled steel tube columns, cfst
concrete filled steel tube columns (cfst) are a kind of composite columns according to advantages of cfst relative to reinforced concrete and steel columns. use of these materials is common in recent years especially in high building, unnecessary of molding, high ductility, proportionate resistance with low volume, economical, low deformation relative to steel columns are among advantages. in t...
متن کاملDetermination of Buckling Loads from Triaxial Load Tests of Slender Concrete-filled Tube Beam-columns
This paper briefly describes efforts at determining buckling loads of slender concrete-filled tube beam-columns. Although utilizing state-of-the-art equipment and controllers, unexpected difficulties were encountered on extracting buckling loads for the specimens due to (a) frictional forces in the actuators, (b) large initial bidirectional imperfections, (c) initial stresses due to constructio...
متن کاملCyclic Evolution of Damage and Beam-column Interaction Strength of Concrete-filled Steel Tube Beam-columns
The assessment of response of composite seismic force resisting systems requires accurate nonlinear formulations for the composite members. In this work, reporting the first phase of a NEES project, a three-dimensional distributed plasticity formulation is presented for both circular and rectangular composite concrete-filled steel tubes (CFTs) that includes new constitutive models for the concr...
متن کاملStructural behaviour of recycled aggregate concrete filled steel tube columns strengthened by CFRP
This paper presents experimental research on structural behaviour of normal and recycled aggregate concrete filled steel tube (RACFT) columns externally strengthened with carbon fibre reinforced polymer (CFRP) sheets and subjected to axial loading. A total of 22 specimens were tested to investigate the influence of the following variables: (1) tube configurations, circular or square, solid or h...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Current Applied Science and Technology
سال: 2021
ISSN: ['2586-9396']
DOI: https://doi.org/10.55003/cast.2022.01.22.005