Energy Consumption Modeling of 4D Printing Thermal-responsive Polymers with Integrated Compositional Design for Material
نویسندگان
چکیده
منابع مشابه
Multimaterial 4D Printing with Tailorable Shape Memory Polymers
We present a new 4D printing approach that can create high resolution (up to a few microns), multimaterial shape memory polymer (SMP) architectures. The approach is based on high resolution projection microstereolithography (PμSL) and uses a family of photo-curable methacrylate based copolymer networks. We designed the constituents and compositions to exhibit desired thermomechanical behavior (...
متن کاملElectrical Energy Demand Modeling of 3D Printing Technology for Sustainable Manufacture
The advent of 3D printers has been embraced globally within few years of its emergence. The surge in the acceptability of rapid manufacturing RM technology can be attributed to the depletion and cost of natural resources, waste reduction and sustainability criterion of manufactured parts. This rapidly evolving 3D printing technologies is predicted to grow exponentially especially for the manufa...
متن کاملIntegrated Design and Simulation of Tunable, Multi-State Structures Fabricated Monolithically with Multi-Material 3D Printing
Multi-material 3D printing has created new opportunities for fabricating deployable structures. We design reversible, deployable structures that are fabricated flat, have defined load bearing capacity, and multiple, predictable activated geometries. These structures are designed with a hierarchical framework where the proposed bistable actuator serves as the base building block. The actuator is...
متن کاملDesign of new molten salt thermal energy storage material for solar thermal power plant
In order to obtain molten salt with lower melting point, higher thermal stability and reduced cost relative to previously available materials, a variety of molten salt mixtures of alkali nitrates are investigated by experimental methods. However, since measurements are generally expensive and time-consuming, it is of interest to be able to predict melting point and the component of multi-compon...
متن کاملMicroencapsulation of Butyl Stearate as Phase Change Material by Melamine Formaldehyde Shell for Thermal Energy Storage
Butyl stearate as a phase change material was microencapsulated within melamine-formaldehyde resin using emulsion polymerization. Morphology and thermal specification of produced microcapsules were studied by Fourier transform infrared spectroscopy, FT-IR, scanning electron microscopy, SEM, and Differential scanning calorimetry analysis, DSC. FT-IR spectra validated the existence of the butyl s...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Additive Manufacturing
سال: 2020
ISSN: 2214-8604
DOI: 10.1016/j.addma.2020.101223