Energy Criterion for Mode II Fracture in Ceramics
نویسندگان
چکیده
منابع مشابه
Prediction of Mode II of Fracture Toughness in Laminate Composites
In this paper, effects of ply orientation of adjacent plies with (ϕ//θ) interfaces on mode II critical strain energy release rate (fracture toughness) of multidirectional (MD) laminate has been studied. Ply orientation of adjacent plies is one of the most important parameters affects the mode II critical strain energy release rate () in the initiation of the delamination. To study this paramet...
متن کاملInterlaminar Mode II Fracture Characterization
Delamination is an important concern in the context of structural behaviour of laminated composite materials. It is known that delamination can diminish the stiffness and the strength of the material and promote structural failure. Delamination onset and growth is governed by interlaminar fracture toughness of the material. Delamination propagation is frequently dominated by mode II fracture; c...
متن کاملEffect of Rock Fracture Filling on Mode I and II Fracture Toughness
This paper focuses on some fracture toughness tests performed on the pre-cracked Brazilian specimens of rock-like materials. Also the effect of rock fracture filling on the fracture toughness was considered experimentally. Fracture toughness is a key parameter for studying the crack propagation and fragmentation processes in rock structures. Fracture mechanics is an applicable tool to improve ...
متن کاملDeveloping a Mode Ii Fracture Model for Composite Laminates
Delamination is a critical form of failure in composite laminates which is partitioned into a combination of three pure modes namely; opening, shearing and tearing (modes I, II and III respectively). Each fracture mode contributes to the total energy required for delamination growth, due to a combination of the different damage mechanisms that occur under each mode 1-2 . To formulate reliable m...
متن کاملGriffith criterion for brittle fracture in graphene.
There are prevailing concerns with the critical dimensions when conventional theories break down. Here we find that the Griffith criterion remains valid for cracks down to 10 nm but overestimates the strength of shorter cracks. We observe the preferred crack extension along the zigzag edge in graphene, and explain this phenomenon by local strength-based failure rather than energy-based Griffith...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Ceramic Society of Japan
سال: 1998
ISSN: 0914-5400,1882-1022
DOI: 10.2109/jcersj.106.698