Energy Harvesting: Enhanced Energy Conversion Performance of a Magneto–Mechano–Electric Generator Using a Laminate Composite Made of Piezoelectric Polymer and Metallic Glass (Adv. Electron. Mater. 1/2021)
نویسندگان
چکیده
A magneto-mechano-electric generator based on a magnetostrictive metallic substrate and piezoelectric polymer is reported by Kyung Tae Kim, Kwi-Il Park, co-workers in article number 2000969. This harvests electric output signals under applied alternating-current magnetic fields, which are abundant daily life.
منابع مشابه
Energy harvesting performance of piezoelectric ceramic and polymer nanowires.
Energy harvesting from ubiquitous ambient vibrations is attractive for autonomous small-power applications and thus considerable research is focused on piezoelectric materials as they permit direct inter-conversion of mechanical and electrical energy. Nanogenerators (NGs) based on piezoelectric nanowires are particularly attractive due to their sensitivity to small-scale vibrations and may poss...
متن کاملShape and geometrical parameter effects of a bimorph piezoelectric beam on energy harvesting performance
In this paper, the shape influence of piezoelectric beams including triangle, trapezoid, rectangle, inverted trapezoid, convex parabola, concave parabola, and comb-shaped (a combination of two triangular beams with a connector of 4 mm length) are addressed and analyzed by FEM. The analysis is performed for a bimorph piezoelectric beam. The analyzed parameters include the beam length, thickness ...
متن کاملPiezoelectric Micro Power Generator for Energy Harvesting
A thin film lead zirconate titanate Pb(Zr,Ti)O3 (PZT), power generating device is developed. It is designed to resonate at specific vibrational frequencies from an ambient, vibrational energy source, thereby creating electrical energy via the piezoelectric effect. The energy harvesting device uses the piezoelectric d33 mode and is fabricated with three mask steps. Our cantilever device was desi...
متن کاملEfficiency of energy conversion for a piezoelectric power harvesting system
This paper studies the energy conversion efficiency for a rectified piezoelectric power harvester. An analytical model is proposed, and an expression of efficiency is derived under steady-state operation. In addition, the relationship among the conversion efficiency, electrically induced damping and ac–dc power output is established explicitly. It is shown that the optimization criteria are dif...
متن کاملPower optimization of a piezoelectric-based energy harvesting cantilever beam using surrogate model
Energy harvesting is a conventional method to collect the dissipated energy of a system. In this paper, we investigate the optimal location of a piezoelectric element to harvest maximum power concerning different excitation frequencies of a vibrating cantilever beam. The cantilever beam oscillates by a concentrated sinusoidal tip force, and a piezoelectric patch is integrated on the beam to gen...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Advanced electronic materials
سال: 2021
ISSN: ['2199-160X']
DOI: https://doi.org/10.1002/aelm.202170002