Engineered coatings for titanium implants to present ultra-low doses of BMP-7
نویسندگان
چکیده
منابع مشابه
BMP-Functionalised Coatings to Promote Osteogenesis for Orthopaedic Implants
The loss of bone integrity can significantly compromise the aesthetics and mobility of patients and can be treated using orthopaedic implants. Over the past decades; various orthopaedic implants; such as allografts; xenografts and synthetic materials; have been developed and widely used in clinical practice. However; most of these materials lack intrinsic osteoinductivity and thus cannot induce...
متن کاملTuning the surface microstructure of titanate coatings on titanium implants for enhancing bioactivity of implants
Biological performance of artificial implant materials is closely related to their surface characteristics, such as microtopography, and composition. Therefore, convenient fabrication of artificial implant materials with a cell-friendly surface structure and suitable composition was of great significance for current tissue engineering. In this work, titanate materials with a nanotubular structu...
متن کاملTitanium monoxide ultra-thin coatings evaporated onto polycrystalline copper films
We evaporated polycrystalline copper thin films of thickness between 10 and 100nm on silicon substrates with their native oxide under ultra-high-vacuum conditions. Some of them were exposed to air for a period ranging from 1 day to 2 weeks. X-ray photoelectron spectroscopy (XPS) revealed a clean copper surface with a trace of oxygen. These films that were exposed to air presented oxides in the ...
متن کاملBiodegradable Chitosan Nanoparticle Coatings on Titanium for the Delivery of BMP-2
A simple method for the functionalization of a common implant material (Ti6Al4V) with biodegradable, drug loaded chitosan-tripolyphosphate (CS-TPP) nanoparticles is developed in order to enhance the osseointegration of endoprostheses after revision operations. The chitosan used has a tailored degree of acetylation which allows for a fast biodegradation by lysozyme. The degradability of chitosan...
متن کاملPreparation of Ultra Dispersive Glasses for Designing Novel Coatings
In order to attain glasses with ultra dispersions properties, different heavy metal oxides were used. The desired glasses were obtained from the addition of high amounts of PbO and Bi2O3 to B2O3 based glasses. Refractive index measurements were carried out accurately at different wavelengths by the minimum angle of deviation in prisms method employing a spectrometer. Results indicated that, as ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: ACS Biomaterials Science & Engineering
سال: 2018
ISSN: 2373-9878,2373-9878
DOI: 10.1021/acsbiomaterials.7b01037