Enhanced erosion performance of cold spray co-deposited AISI316 MMCs modified by friction stir processing

Friction stir welding and processing

Friction stir welding (FSW) is a relatively new solid-state joining process. This joining technique is energy efficient, environment friendly, and versatile. In particular, it can be used to join high-strength aerospace aluminum alloys and other metallic alloys that are hard to weld by conventional fusion welding. FSW is considered to be the most significant development in metal joining in a de...

Enhanced HDN Performance of Al, Zr and Ti Modified NiW Catalysts by Using Co-Impregnation Method

The Al, Zr, and Ti modified MCM-41 materials were prepared by the post-synthesis method, and then the Ni-W species were introduced on them by using the co-impregnation method in order to obtain high-performance hydrodenitrogenation (HDN) catalysts. The activity of the catalysts was evaluated by the HDN reaction of quinoline. The optimum HDN activity was observed on the catalyst sup...

Friction Stir Processing of 304L Arc Welds

Corrosion of Cold Spray Deposited Copper Coating on Steel Substrates

The corrosion behavior of copper cold spray coatings on a carbon steel substrate was compared to that of commercially available wrought copper under the conditions anticipated in a nuclear waste repository. Corrosion potential and linear polarization resistance measurements were conducted over 90 d to 120 d in 3.0 mol/L NaCl under anoxic (1) and oxygenated-toanoxic (2) conditions to simulate th...

Enhanced methanol sensing performance of oblique deposited WO3 thin films

Methanol (CH3OH) is a colorless liquid with a mild odor. The wide ranges of applications, toxicity and clinical implications of methanol have made necessary to develop reliable and high-performance methanol sensors. In this paper, WO3 thin films were deposited on SiO2/Si substrates by e-beam evaporation technique under normal and oblique angles and then post-annealed at 500 °C with a flow of ox...