Enhanced sulfur utilization in lithium-sulfur batteries by hybrid modified separators
نویسندگان
چکیده
منابع مشابه
Capacity Fade Analysis of Sulfur Cathodes in Lithium–Sulfur Batteries
Rechargeable lithium-sulfur (Li-S) batteries are receiving ever-increasing attention due to their high theoretical energy density and inexpensive raw sulfur materials. However, their rapid capacity fade has been one of the key barriers for their further improvement. It is well accepted that the major degradation mechanisms of S-cathodes include low electrical conductivity of S and sulfides, pre...
متن کاملSulfur-impregnated disordered carbon nanotubes cathode for lithium-sulfur batteries.
The commercialization of lithium-sulfur batteries is hindered by low cycle stability and low efficiency, which are induced by sulfur active material loss and polysulfide shuttle reaction through dissolution into electrolyte. In this study, sulfur-impregnated disordered carbon nanotubes are synthesized as cathode material for the lithium-sulfur battery. The obtained sulfur-carbon tube cathodes d...
متن کاملGraphene/Sulfur/Carbon Nanocomposite for High Performance Lithium-Sulfur Batteries
Here, we report a two-step synthesis of graphene/sulfur/carbon ternary composite with a multilayer structure. In this composite, ultrathin S layers are uniformly deposited on graphene nanosheets and covered by a thin layer of amorphous carbon derived from β-cyclodextrin on the surface. Such a unique microstructure, not only improves the electrical conductivity of sulfur, but also effectively in...
متن کاملDevelopment in Lithium/Sulfur Secondary Batteries
This paper reviews different modification methods to cathode, anode and electrolyte materials in view of their electrochemical properties for application in lithium/sulfur batteries. In the sulfur electrode, carbonaceous materials, conductive polymer materials, and metal oxide adsorbing materials are employed to enhance conductivity and reduce polysulfide dissolution. The effects of anodes and ...
متن کاملThree-Dimensional Sulfur/Graphene Multifunctional Hybrid Sponges for Lithium-Sulfur Batteries with Large Areal Mass Loading
In this communication, we introduce the concept of three dimensional (3D) battery electrodes to enhance the capacity per footprint area for lithium-sulfur battery. In such a battery, 3D electrode of sulfur embedded into porous graphene sponges (S-GS) was directly used as the cathode with large areal mass loading of sulfur (12 mg cm(-2)), approximately 6-12 times larger than that of most reports...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials Today Communications
سال: 2021
ISSN: 2352-4928
DOI: 10.1016/j.mtcomm.2021.102133