Enhanced Ultra-Sensitive Metamaterial Resonance Sensor based on Double Corrugated Metal stripe for Terahertz Sensing
نویسندگان
چکیده
منابع مشابه
Ultra-Compact Bidirectional Terahertz Switch Based on Resonance in Graphene Ring and Plate
In this paper, we present a switch based on coupling and resonance in thegraphene plate and rings operating at 10 THz. This structure consists of several layers ofHexagonal Boron Nitride (hBN), SiO2 and P+Si, such that graphene plates and rings areinside the hBN layer. The terahertz wave is incident from the upper part of the switchand Surface Plasmons (SPs) are excited ...
متن کاملPlanar plasmonic terahertz waveguides based on periodically corrugated metal films
We demonstrate that a one-dimensional periodically corrugated metal film can be used to create planar terahertz (THz) waveguides. The periodic corrugation is in the form of rectangular blind holes (i.e. holes that do not completely perforate the metal film) that are fabricated using a multilayer construction. The approach allows for the creation of structures in which the hole depth can be more...
متن کاملHigh-mode spoof SPP of periodic metal grooves for ultra-sensitive terahertz sensing.
We report terahertz surface plasmon resonance (SPR) sensing based on prism-coupling to the spoof surface plasmon polariton (SSPP) mode existing on periodically grooved metal films. It was demonstrated that, except for the fundamental mode of the SSPP, there was also a higher mode SSPP wave when the depth of groove was larger. Both fundamental and high-order modes of SSPP could be used for terah...
متن کاملDual-band, Dynamically Tunable Plasmonic Metamaterial Absorbers Based on Graphene for Terahertz Frequencies
In this paper, a compact plasmonic metamaterial absorber for terahertz frequencies is proposed and simulated. The absorber is based on metamaterial graphene structures, and benefits from dynamically controllable properties of graphene. Through patterning graphene layers, plasmonic resonances are tailored to provide a dual band as well as an improved bandwidth absorption. Unit cell of the design...
متن کاملTiO2 based surface acoustic wave gas sensor with modified electrode dimensions for enhanced H2 sensing application
The design and optimization of nanostructure-based surface acoustic wave (SAW) gas sensor is analyzed based on TiO2 sensing layer and modified electrode dimensions. The sensitivity of the gas sensor depends upon the type of sensing layer used and active surface area obtained by varying the aspect ratio. The performance of the sensor is observed from 0.1ppm to 100ppm concentration of ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Scientific Reports
سال: 2019
ISSN: 2045-2322
DOI: 10.1038/s41598-019-44026-4