Enhancement of mechanical properties of SiCw/ SiCp-reinforced magnesium composites fabricated by spark plasma sintering
نویسندگان
چکیده
منابع مشابه
Effect of SiC nanoparticles addition on mechanical properties and wear resistance of cemented carbides fabricated by spark plasma sintering
WC-10Co cemented carbides containing 1 to 4 wt% SiC nanoparticles were prepared by spark plasma sintering. The effects of SiC content on microstructure, mechanical properties and wear resistance of the sintered materials were studied. Microstructural studies showed that SiC addition resulted in WC grain coarsening. In addition, the hardness decreased with increasing SiC content. However, the fr...
متن کاملCharacterization and mechanical testing of alumina-based nanocomposites reinforced with niobium and/or carbon nanotubes fabricated by spark plasma sintering
Alumina-based nanocomposites reinforced with niobium and/or carbon nanotubes (CNT) were fabricated by advanced powder processing techniques and consolidated by spark plasma sintering. Raman spectroscopy revealed that single-walled carbon nanotubes (SWCNT) begin to break down at sintering temperatures >1150 C. Nuclear magnetic resonance showed that, although thermodynamically unlikely, no Al4C3 ...
متن کاملCharacterization of Multiwalled Carbon Nanotube-Reinforced Hydroxyapatite Composites Consolidated by Spark Plasma Sintering
Pure HA and 1, 3, 5, and 10 vol% multiwalled carbon nanotube- (MWNT-) reinforced hydroxyapatite (HA) were consolidated using a spark plasma sintering (SPS) technique. The relative density of pure HA increased with increasing sintering temperature, but that of the MWNT/HA composite reached almost full density at 900°C, and then decreased with further increases in sintering temperature. The relat...
متن کاملAging behavior of nano-SiCp reinforced AZ61 magnesium matrix composites
Male, born in 1962, Ph.D, Professor. He obtained his Ph.D at Nanchang University. His research and teaching interests mainly focus on magnesium/aluminum alloys and investment casting process. He has published more than 200 papers by now. E-mail: [email protected] Received: 2011-01-25; Accepted: 2011-05-04 *Yan Hong *Yan Hong, Hu Xiaowu, Nie Qiao and Chen Lei (School of Mechanical-Electrical En...
متن کاملZrB2-CNTs Nanocomposites Fabricated by Spark Plasma Sintering
ZrB₂-based nanocomposites with and without carbon nanotubes (CNTs) as reinforcement were prepared at 1600 °C by spark plasma sintering. The effects of CNTs on the microstructure and mechanical properties of nano-ZrB₂ matrix composites were studied. The results indicated that adding CNTs can inhibit the abnormal grain growth of ZrB₂ grains and improve the fracture toughness of the composites. Th...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Results in Materials
سال: 2021
ISSN: 2590-048X
DOI: 10.1016/j.rinma.2020.100167