Enhancement of the Micro-EDM Process for Drilling Through-holes
نویسندگان
چکیده
منابع مشابه
Taguchi method and Pareto ANOVA: An approach for process parameters optimization in micro-EDM drilling
Technological advances have facilitated many developments in the MEMS, electrical, medical and aerospace industries in recent years. As the devices commonly found in these industries have become smaller, so the requirements for high-precision machining techniques have become ever more pressing. Nowadays, micro-machining processes are playing an important role in satisfying these requirements. A...
متن کاملA Review of Micro - EDM
There is a huge demand in the production of microstructures by a non-traditional method which is known as Micro-EDM. Micro-EDM process is based on the thermoelectric energy between the workpiece and an electrode. Micro-EDM is a newly developed method to produce micro-parts which in the range of 50 μm -100 μm. Micro-EDM is an efficient machining process for the fabrication of a micro-metal hole ...
متن کاملeffect of the micro wire-edm process parameters on the recast layer in the molybdenum micromachining
the micro wire electrical discharge machining (micro wire-edm) process is a modern machining process with various applications in manufacturing micro-parts. the recast layer remaining on the machined surfaces is an inevitable complication of this process. this layer can subsequently affect the machined parts performance. to optimize the recast layer in the micro wire-edm of the molybdenum micro...
متن کاملMICRO-EDM FOR MICRO-CHANNEL FABRICATION ON NONCONDUCTIVE ZrO2 CERAMIC
In this study, microelectro-discharge (micro-ED) milling of nonconductive ZrO2ceramicsis investigated using a Cu tool electrode in kerosene dielectric. An adhesive Cu foil is firmly attached on the workpiece to initiate the sparks. After the machining of Cu foil, an electrically conductive carbonic layer is formed on the ceramic workpiece disassociating the kerosene dielectric, which allows mic...
متن کاملFuzzy Modeling for Micro EDM Parameters Optimization in Drilling of Biomedical Implants Ti-6Al-4V Alloy for Higher Machining Performance
Ti6Al4V alloy is highly used in the automotive and aerospace industry due to its good machining characteristics. Micro EDM drilling is commonly used to drill micro hole on extremely hard material with very high depth to diameter ratio. In this study, the parameters of micro-electrical discharge machining (EDM) in drilling of Ti6Al4V alloy is optimized for higher machining accuracy with less hol...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Procedia CIRP
سال: 2018
ISSN: 2212-8271
DOI: 10.1016/j.procir.2017.12.123