Entropy generation minimization of steam methane reforming reactor with linear phenomenological heat transfer law
نویسندگان
چکیده
منابع مشابه
CFD-simulation of membrane reactor for methane steam reforming
A membrane reactor is a reaction system that provides higher productivity and lower separation cost in chemical reaction processes. In this paper, packed bed catalytic membrane reactor with palladium membrane for methane steam reforming was analyzed both experimentally and numerically. The numerical model consists of a full set of partial differential equations derived from conservation of mass...
متن کاملCFD modeling and control of a steam methane reforming reactor
This work initially focuses on developing a computational fluid dynamics (CFD) model of an industrialscale steam methane reforming reactor (reforming tube) used to produce hydrogen. Subsequently, we design and evaluate three different feedback control schemes to drive the area-weighted average hydrogen mole fraction measured at the reforming tube outlet ( x̄H outlet 2 ) to a desired set-point va...
متن کاملDesign of a Microchannel Based Solar Receiver/reactor for Methane-steam Reforming
This study investigates use of solar thermochemical processing of clean fuels using biomass products (in particular CH4, H2O). To address technological feasibility of a microchannel-based solar receiver/reactor, a combined numerical and experimental study of methane-steam reforming is carried out on a single microchannel with Palladium-deposited channel walls and heat input to facilitate endoth...
متن کاملNuclear Reactor Steam Generation
1. Steam Generation 1.1. General Characteristics 1.2. Circulation in Boiling Water Reactors 1.3. Steam Generation in CANDU Reactors 1.4. Steam Generators 1.5. Steam Generator for PWR and CANDU Systems 1.6. Heat Transfer 2. Steam Generator Operation 2.1. Swelling and Shrinking 2.1.1. Steady State Swelling and Shrinking 2.1.2. Transient Swelling and Shrinking 2.2. Level Control 2.3. Carryover 2.4...
متن کاملOptimization of Double Pipe Fin-pin Heat Exchanger Using Entropy Generation Minimization
In the current work optimization of double pipe fin-pin heat exchanger has been studied. The effective parameters those are controlling the heat exchanger performance are divided in two categories; geometrical and operating conditions. Using the Brent’s optimization algorithm and handling the thermodynamically design concept, one can minimize entropy generation in different length of heat excha...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: SCIENTIA SINICA Technologica
سال: 2017
ISSN: 1674-7259
DOI: 10.1360/n092016-00255