Environmental Attack on Adhesive Joints. Part II: Locus of Failure.
نویسندگان
چکیده
منابع مشابه
Failure Procedure in Adhesive Composite Joints under Different Types of Loading
In this paper, we have used numerical simulation to study failure of adhesive joints in composite plates. To determine the failure load, adhesive joints are subjected to different types of loading and gradual failure of the joint is studied using the finite element method. The composite material failure theory is implemented into the FEM software. Also different geometries for the joint edge ar...
متن کاملElastic-plastic Mode-ii Fracture of Adhesive Joints
A numerical study of the elastic-plastic mode-II fracture of adhesive joints is presented in this paper. A traction-separation law was used to simulate the mode-II interfacial fracture of adhesively-bonded end-notched flexure (E.N.F.) specimens loaded in three-point bending, with extensive plastic deformation accompanying failure. The fracture parameters for the traction-separation law were det...
متن کاملOn the Toughness of Ductile Adhesive Joints
Crack propagation along one of the interfaces between a thin ductile adhesive layer and the elastic substrates it joins is considered. The layer is taken as being elastic-plastic, and the fracture process of the interface is modeled by a traction-separation law, characterized by the peak separation stress 6 and the work of separation per unit area To. Crack growth resistance curves for mode I l...
متن کاملEnvironmental effects on mechanical properties of glass/epoxy and fiber metal laminates, Part II: Isothermal aging
The aim of this study is to investigate effects of isothermal aging on mechanical properties of fiber metal laminates (FMLs) and glass/epoxy composites. For this purpose, both materials were fabricated using the wet lay-up manufacturing technique under vacuum pressure. Both the glass/epoxy composites and the FML specimens were then subjected to isothermal aging (130°C, dried air) for up to 5 we...
متن کاملEnvironmental Aging Effects on the Durability of Electrically Conductive Adhesive Joints
The mechanical behavior of electrically conductive adhesive joints exposed to elevated temperature and relative humidity conditions has been investigated, and failure mechanisms of conductive adhesive joints have been determined. Three model, silver-filled, epoxy-based adhesive systems have been studied in conjunction with printed circuit board (PCB) substrates with metallizations of Au/Ni/Cu a...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: JSME International Journal Series A
سال: 1998
ISSN: 1344-7912,1347-5363
DOI: 10.1299/jsmea.41.395