Epitaxial Growth of Chromium Oxynitride Thin Films on Magnesium Oxide (100) Substrates and Their Oxidation Behavior
نویسندگان
چکیده
منابع مشابه
Epitaxial growth of Cu ( 100 ) and Pt ( 100 ) thin films on perovskite substrates Andrew
Pulsed laser deposition (PLD) has been used to grow epitaxially oriented thin films of Cu and Pt on (100)-oriented substrates of both SrTiO3 and LaAlO3. The resulting films have been characterized for their crystalline orientations using x-ray diffraction (XRD) and for their surface morphologies using atomic force microscopy (AFM). The diffraction results illustrated that purely epitaxial Cu(10...
متن کاملUltraviolet detectors based on annealed zinc oxide thin films: epitaxial growth and physical characterizations
In this report, ultraviolet (UV) detectors were fabricated based on zinc oxide thin films. The epitaxial growth of zinc oxide thin films was carried out on bare glass substrate with preferred orientation to (002) plane of wurtzite structure through radio frequency sputtering technique. The structural properties indicated a dominant peak at 2θ=34.28º which was matched with JCPDS reference card N...
متن کاملarchitecture and engineering of nanoscale sculptured thin films and determination of their properties
چکیده ندارد.
15 صفحه اولEpitaxial growth of highly-crystalline spinel ferrite thin films on perovskite substrates for all-oxide devices
The potential growth modes for epitaxial growth of Fe3O4 on SrTiO3 (001) are investigated through control of the energetics of the pulsed-laser deposition growth process (via substrate temperature and laser fluence). We find that Fe3O4 grows epitaxially in three distinct growth modes: 2D-like, island, and 3D-to-2D, the last of which is characterized by films that begin growth in an island growt...
متن کاملGrowth of Epitaxial Oxide Thin Films on Graphene
The transfer process of graphene onto the surface of oxide substrates is well known. However, for many devices, we require high quality oxide thin films on the surface of graphene. This step is not understood. It is not clear why the oxide should adopt the epitaxy of the underlying oxide layer when it is deposited on graphene where there is no lattice match. To date there has been no explanatio...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: MATERIALS TRANSACTIONS
سال: 2013
ISSN: 1345-9678,1347-5320
DOI: 10.2320/matertrans.maw201310