Erratum for “Pressure Testing of Thick Reinforced Concrete Cell”
نویسندگان
چکیده
منابع مشابه
Flexural Testing of High Strength Reinforced Concrete Beams Strengthened with CFRP Sheets
The objective of this study is to investigate the effectiveness of externally bonded CFRP sheets to increase the flexural strength of reinforced high strength concrete (HSC) beams. Four-point bending flexural tests to complete failure on six concrete beams, strengthened with different layouts of CFRP sheets were conducted. Three-dimensional nonlinear finite element (FE) models were adopted by A...
متن کاملCalibration of Load and Resistance Factors for Reinforced Concrete
Current approach for designing of reinforced concrete members is based on the load and resistance factor. However the load and resistance parameters are random variables, the constant values have been designated for them in the designing procedure. Assuming these factors as the constants, will be led to the unsafe and uneconomical designs. Safe designing of structures requires appropriate recog...
متن کاملGlass Fibre Reinforced Concrete
Glass Fibre Reinforced Concrete is recent introduction in the field of concrete technology. The present day world is witnessing the construction of very challenging and difficult Civil Engineering Structures. Concrete being the most important and widely used material is called upon to possess very high strength and sufficient workability properties. Concrete the most widely used consrtuction ma...
متن کاملRehabilitation of Reinforced Concrete Columns
In recent years, rehabilitation has been the subject of extensive research due to increased spending on building work and repair of built works. In all cases, it is absolutely essential to carry out methods of strengthening or repair of structural elements, and that following an inspection analysis and methodology of a correct diagnosis. The reinforced concrete columns are important elements in...
متن کاملAn optimal method to design reinforced concrete lining of pressure tunnels
The utilization of the lining type in pressure tunnels is highly dependent on the geological and hydraulic conditions. There are two types of lining, namely concrete and steel lining but steel lining is one of the most expensive arrangements. To decrease the length of steel lining in these tunnels, the concrete lining, which prevents water seepage from the surrounding rock mass, is the appropri...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Structural Division
سال: 1965
ISSN: 0044-8001,2690-3377
DOI: 10.1061/jsdeag.0001216