Errors in Optical Microscope Measurements Using Image Analysis
نویسندگان
چکیده
منابع مشابه
Displacement/strain measurements using an optical microscope and digital image correlation
Dwayne D. Arola University of Maryland Baltimore County Department of Mechanical Engineering Baltimore, Maryland 21250 Abstract. We conduct displacement/strain measurements on the microscale using light microscopy and digital image correlation DIC . Errors in the measurements attributed to the optical arrangement and aberration induced at high magnification are identified using a warping functi...
متن کاملImage-guided prostate radiotherapy: analysis of inter- fractional setup errors
Introduction: The accuracy of the patient setup and tumor location are major factors that determine the efficacy of radiotherapy treatment planning. In the prostate radiotherapy, reproducibility of the prostate location for each treatment fraction is problematic owing to varying filling of the rectum and bladder. According to this, the aim of this study was to measure the inte...
متن کاملWeight Measurements by Using Simple Optical-Fiber Sensors (RESEARCH NOTE)
The use of different optical-fiber sensors for weighing measurements is Abstract described. By using three different mechanical stressing mechanisms, the operation of the fiber-to-fiber transducer systems are tested and the results are presented. Parameters such as sensitivity, hysteresis, resolution, and dynamic range are measured. A comparison of the results has shown that the sensor system m...
متن کاملAutomating Microscope Colour Image Analysis Using the Expectation Maximisation Algorithm
Dyed barley cells in microscope colour images of biological experiments are analysed for the occurrence of haustoria of the powdery mildew fungus by a fully automated screening system. The region of interest in the images is found by applying Canny’s edge detector to the hue channel of the HSV colour space. Potential haustoria regions are extracted in RGB colour space by an adaptive Gaussian mi...
متن کاملNanoscale Measurements With a Through-Focus Scanning Optical Microscope
Introduction In the current world of nanotechnology, fast and reliable measurement of nanoscale features is extremely useful. It is further advantageous if the analytical tools used are cost-effective and have high throughput, such as optics-based tools. In conventional optical microscopy, it is usually deemed necessary to acquire images at the “best-focus” position for meaningful analysis. How...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Microscopy and Microanalysis
سال: 2005
ISSN: 1431-9276,1435-8115
DOI: 10.1017/s1431927605506159