Estimation of elastic moduli of mixed porous clay composites
نویسندگان
چکیده
منابع مشابه
Measurement of elastic moduli of porous SiC/SiC ceramic matrix composites using ultrasonics
Forced Chemical Vapor Infiltration (FCVI) method was used in fabricating the Nicalon TM!Silicon Carbide composites. Both through-thickness and In-plane (fiber fabric plane) moduli were determined using ultrasonic techniques. The through-thickness moduli were found to be much less than the inplane moduli. Both in-plane and through-thickness moduli were significantly decreased with an increased p...
متن کاملOn the Elastic Moduli of Unidirectional Fibre Reinforced Composites
A simple analytical technique is presented for obtaining lower bounds to the effective moduli of unidirec-tional fibre-reinforced composites with any repetitive array of fibres. The analysis depends upon a direct method involving stress-equilibrium and strain-continuity considerations, and thus it differs from the type of analysis due to Hashin and Hill (and others) involving variational method...
متن کاملMeasuring In-plane Elastic Moduli of Composites with Arrays
Ultrasonic measurements of elastic moduli of composite materials have traditionally been made on either small specimens cut from a iar ger component or by using a scanning technique with the specimen immersed in a water bath. A phase-insensitive array has been developed for rapid nondestructive measurement of in-plane elastic moduli. The array characteristics allow for determinat ion of energy ...
متن کاملMolecular Dynamics Simulations of the Elastic Moduli of Polymer-Carbon Nanotube Composites
The elastic moduli of polymer-carbon nanotube composites are examined by molecular dynamics simulations of a single-walled carbon nanotube embedded in polyethylene. The overall system is modeled with a many-body bond order potential due to Brenner. Alternatively, only the carbon nanotube is modeled with Brenner’s potential and the polyethylene matrix is modeled by a united-atom potential. For t...
متن کاملElastic Moduli of Precompressed Pyrophyllite
Chao and Ruoff [*] have shown previously that by precompressing pyrophyllite prior to its use in high-pressure applications, one obtains a material which has a uniform density and uniform mechanical properties. We have recently studied the propagation of u trasonir nplIse~ in pyrnphyllit.p specimens to investigate the effect of specimen precompression on the.measured elastic moduli. Measurement...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: GEOPHYSICS
سال: 2011
ISSN: 0016-8033,1942-2156
DOI: 10.1190/1.3511351