Estimation of rainfall-induced surface runoff for the Assam region, India, using the GIS-based NRCS-CN method

نویسندگان

چکیده

The NRCS-CN method, integrated with GIS and remote sensing, can be used for estimating curve numbers (CN) surface runoff in geohydrological systems. study area is divided into 63 sub-basins, the land use cover (LULC)-hydrologic soil group (HSG) complex identified each sub-basin. CN values three antecedent moisture (AMC) conditions are calculated corrected slope variations. depth determined using rainfall data 16 years (2005–2020). average mean annual precipitation ranges from 444.50 to 1960.55 mm 936.99 3520.55 mm, respectively. For all strong correlations between (R2 ≥ 0.8) as well simulated measured observed. Nash–Sutcliffe model efficiency coefficient (NSE) suggest that model's good satisfactory.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Comparison of GIS based SCS-CN and Strange table Method of Rainfall-Runoff Models for Veeranam Tank, Tamil Nadu, India

One of the major problems confronted by the hydrologists for many years is the prediction of runoff from a given basin for a known rainfall. In this situation, development of a rainfall runoff model is important in Veeranam tank catchment located at latitude 11° 15’00” and longitude 79° 30’00’ E in Cuddalore District of Tamilnadu, India. By considering the above said aspect the rainfall-runoff ...

متن کامل

buckling of viscoelastic composite plates using the finite strip method

در سال های اخیر، تقاضای استفاده از تئوری خطی ویسکوالاستیسیته بیشتر شده است. با افزایش استفاده از کامپوزیت های پیشرفته در صنایع هوایی و همچنین استفاده روزافزون از مواد پلیمری، اهمیت روش های دقیق طراحی و تحلیل چنین ساختارهایی بیشتر شده است. این مواد جدید از خودشان رفتارهای مکانیکی ارائه می دهند که با تئوری های الاستیسیته و ویسکوزیته، نمی توان آن ها را توصیف کرد. این مواد، خواص ویسکوالاستیک دارند....

the use of appropriate madm model for ranking the vendors of mci equipments using fuzzy approach

abstract nowadays, the science of decision making has been paid to more attention due to the complexity of the problems of suppliers selection. as known, one of the efficient tools in economic and human resources development is the extension of communication networks in developing countries. so, the proper selection of suppliers of tc equipments is of concern very much. in this study, a ...

15 صفحه اول

Surface runoff estimation of Wadi Ba Al-Arid watershed North East Libya, using SCS-CN ,GIS and RS data

The aim of this study is to estimate runoff in Wadi Ba Al Arid watershed for a period of ten years 2009-2018 by  Soil Conservation Service  Curve Number (SCS-CN) method in combination with the GIS techniques using remote sensing data. The used data are the daily rainfall data from NASA Prediction of Worldwide Energy Resource (POWER), digital elevation data (DEM) from ALOS PALSAR RTC , satellite...

متن کامل

Application of NRCS-curve number method for runoff estimation in a mountainous watershed

The major problem in the assessment of relationships between rainfall and runoff occurs when a study is carried out in ungauged watersheds in the absence of hydro-climatic data. This study aims to evaluate the applicability of Natural Resources Conservation Service-Curve Number (NRCS-CN) method together with GIS in estimating runoff depth in a mountainous watershed. The study was carried out in...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Journal of Maps

سال: 2022

ISSN: ['1744-5647']

DOI: https://doi.org/10.1080/17445647.2022.2076624