Evaluating Hole Quality in Drilling of Al 6061 Alloys

Machinability of Titanium Alloys in Drilling

EXPERIMENTALl ANALYSIS OF PARTITION COEFFICIENT IN Al-Mg ALLOYS

Because the partition coefficient is one of the most important parameters affecting microsegregation, the aim of this research is to experimentally analyse the partition coefficient in Al-Mg alloys. In order to experimentally measure the partition coefficient, a series of quenching experiments during solidification were carried out. For this purpose binary Al-Mg alloys containing 6.7 and 10.2 w...

Influence of the Alloying Elements on Uniform and Pitting Corrosion Events Induced by SCN- Anions on Al-6061 and Al-Cu Alloys Surfaces

The electrochemical and corrosion behaviour of Al-6061, Al-4.5%Cu and Al-7.5%Cu alloys were studied in 0.50 M KSCN solution at 25 C. Open-circuit potential, Tafel polarization and ICP-AES measurements were used to study the uniform corrosion process on the surfaces of the tested alloys. Cyclic polarization measurements were employed for pitting corrosion studies. Obtained results were compared ...

Micro-hole drilling with femtosecond fiber laser

In this paper, micro-hole drilling in ambient air is presented using fs fiber laser (750 fs & 1030 nm). Micro holes were fabricated in both transparent (glasses) and non-transparent materials (metals and tissues). Hole shape and morphology was characterized and evaluated with optical microscope and scanning electron microscopy (SEM). Debris-free micro holes with good roundness and no thermal da...

The Electrochemical Behavior of Al Alloys in NaCl Solution in the Presence of Pyrazole Derivative

This paper studies the corrosion inhibition of Al-Mg alloy system in 0.5 mol/dm3 NaCl solution in the presence of pyrazole derivative using potentiodynamic polarization and linear polarization method. The inhibition efficiency as a function of concentration and temperature was investigated. From the polarization curves, it can be concluded that the pyrazole derivative be...