EVALUATION FOR FLEXURAL CAPACITY OF THIN REINFORCED CONCRETE MEMBERS
نویسندگان
چکیده
منابع مشابه
Application of Hydrophilic Silanol-Based Chemical Grout for Strengthening Damaged Reinforced Concrete Flexural Members
In this study, hydrophilic chemical grout using silanol (HCGS) was adopted to overcome the performance limitations of epoxy materials used for strengthening existing buildings and civil engineering structures. The enhanced material performances of HCGS were introduced, and applied to the section enlargement method, which is one of the typical structural strengthening methods used in practice. T...
متن کاملTopology Optimization of Strut-and-Tie Models in Non-Flexural Reinforced Concrete Members
This paper deals with the topology optimization of strut-and-tie models in non-flexural reinforced concrete members by using the Evolutionary Structural Optimization (ESO) method for plane stress continuum structures with displacement constraints. By means of systematically removing elements that have less contribution to the stiffness from the discritized concrete member, the actual load paths...
متن کاملBond Deformability of Reinforced Concrete Members
The usual earthquake resistant design philosophy of ductile frame buildings allows the beams to form plastic hinges adjacent to beam-column connections. In order to carry out this design philosophy, the ultimate bond or shear strength of the beam should be greater than the flexural yielding force and should not degrade before reaching its required ductility. The behavior of RC members dominated...
متن کاملFlexural and Tensile Characteristics of Micro Fiber-reinforced Very High Strength Concrete Thin Panels
The purpose of this research was to experimentally characterize the flexural and tensile characteristics of fiber-reinforced Very High-Strength Concrete (VHSC) panels. The panels were made with a unique mix of cementitous materials achieving compressive strength of 26,000 psi (180 MPa) or greater. VHSC panels were reinforced with polypropylene fibers of 1 inch (25.4 mm) in length and Polyvinyl ...
متن کاملExperimental Investigations on The Flexural Strength of PET Reinforced Concrete
Due to the rapid industrialization taking place globally, the problems generated are acute shortage of construction material and increasing in productivity of wastes. The production and consumption of plastic and the rate at which solid plastic waste (SPW) are created have increased considerably. Plastics constitute 12.3% of total waste produced most of which is from discarded water bottles. Th...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Japan Society of Civil Engineers, Ser. E2 (Materials and Concrete Structures)
سال: 2011
ISSN: 2185-6567
DOI: 10.2208/jscejmcs.67.361