Evaluation Method for Shear Strength of Adhesives Using Single Lap Joints
نویسندگان
چکیده
منابع مشابه
Possibilities of Adhesives Filling with Micro-particle Fillers – Lap- Shear Tensile Strength
VALÁŠEK PETR, MÜLLER MIROSLAV. 2016. Possibilities of Adhesives Filling With Micro-particle Fillers – Lap-shear Tensile Strength. Acta Universitatis Agriculturae et Silviculturae Mendelianae Brunensis, 64(1): 195–201. An adhesive bonding can be ranged among technologies of materials bonding which are used in all industrial branches. It plays its important role also in an area of the constructio...
متن کاملStrength Prediction in CFRP Woven Laminate Bolted Single-Lap Joints under Quasi-static Loading using XFEM
This paper is concerned with modelling damage and fracture in woven fabric CFRP single-lap bolted joints that fail by net-tension. The approach is based on the assumption that damage (matrix cracking, delamination and fibre tow fracture) initiates and propagates from the hole in a self-similar fashion. A traction-separation law (based on physically meaningful material parameters) is implemented...
متن کاملEvaluation of Fatigue Life Reduction Factors at Bolt Hole in Double Lap Bolted Joints Using Volumetric Method
In this research, the influence of bolt preload on the fatigue strength of 2024-T3 aluminium alloy double lap bolted joints has been studied experimentally and numerically. To do so, three sets of the specimens were prepared and each of them subjected to tightening torque of 1,2.5 and 5 N-m and then fatigue tests were conducted under various cyclic axial load levels. In the numerical method, th...
متن کاملEFFECTS OF pH ON LAP-SHEAR STRENGTH FOR ASPEN VENEER
This study is one part of a whole project called “Impact of Extreme pH of Structural Adhesives on Bond Durability.” The objective of this study was to evaluate effects of pH on wood– adhesive bond strength and chemical change in aspen (Populus tremuloides Michx) wood caused by extreme pH exposures. Aspen veneer lap-shear samples were tested for maximum stress (N/mm) and wood failure (%) after e...
متن کاملResidual Strength Analyses of Riveted Lap-Splice Joints
Aging aircraft may develop multiple-site damage (MSD) that can reduce the structural integrity of fuselage structures. The existence of small cracks emanating from adjacent rivet holes in a fuselage lap-splice joint is of major concern. Small collinear cracks greatly reduce the residual strength of a panel with a lead crack. Recent studies predicting the residual strength of flat and curvilinea...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of The Adhesion Society of Japan
سال: 2014
ISSN: 0916-4812,2187-4816
DOI: 10.11618/adhesion.50.107