Evaluation of a protective acrylic finish applied to surfaces painted with acrylic paints for outdoor or indoor uses

نویسندگان

چکیده

Protection of contemporary murals to reduce paint fading caused by exposure sunlight is currently under study due a general demand. In this we evaluated the effectiveness commercial protective acrylic finish applied concrete and brick mock-ups previously painted with different coloured (red yellow) paints for outdoor indoor uses. The were exposed an accelerated aging test, artificial UV irradiation 3630 h. radiation most threatening portion used in these artworks, inducing mainly fading. Colorimetric measurements made on surfaces every 15 days. At end, aged samples respective controls (not subjected test) stereomicroscopy, X-ray diffraction, Fourier transform infrared spectroscopy scanning electron microscopy. Application modified surface paintwork, but generally reduced rate at which colour changed. use without finish, paintwork degraded faster than concrete. findings highlight need appropriate selection depending where they will be suitability using composition each paint.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Photo-oxidative Stability of a Series of Red Acrylic Paints

Photo-oxidative stability of a series of most common red acrylic paints has been investigated. The paints in question were carmine, quinacridone scarlet, alizarin crimson, brilliant red, vermilion and cadmium red hue. Structural changes, discoloration and weight loss of paints film subjected to UV irradiation in an accelerated ageing chamber were measured using FT-IR spectroscopy, colorimetry a...

متن کامل

Comparison of Water Sorption of Two Injection Acrylic Resins with a Conventional Pressure-Packed Acrylic Resin

Background and Aim: Water sorption is one of the most important properties that affects the quality of a prosthesis, and subsequently, the quality of treatment, and pa-tient’s quality of life. The aim of this study was to determine and compare the water sorption of two types of poly methyl methacrylate (PMMA) using the injection-molding systems with a traditional acrylic resin base material. M...

متن کامل

Solar Radiation Durability Framework Applied To Acrylic Solar Mirrors

Mirror augmented photovoltaic (MAPV) systems utilize low cost mirrors to couple more light into a photovoltaic (PV) absorber. By increasing the light absorbed, they are expected to produce less expensive electricity. As a substrate candidate for back surface reflector mirrors, two grades of PMMA have been exposed to UV stress from two sources at two intensities for two doses in an effort to see...

متن کامل

Evaluation of hydrophilic properties of acrylonitrile/acrylic acid copolymer films dendrigrafted with citric acid

The present study investigates the hydrophilic properties of acrylonitrile/acrylic acid P(AN/AA) copolymer films with various acrylic acid (AA) contents dendrigrafted with citric acid from zero to fourth generation numbers. It was found that the hydrophilicity of the dendrigrafted films was a complicated phenomenon. Various parameters such as intermolecular hydrogen bonding, roughness and activ...

متن کامل

A Metal-Acrylic Bar for Splinting Implant Impression Copings

Precise transfer of three-dimensional position of dental implants from oral cavity to the cast needs special considerations in impression making. It has been suggested to splint the copings by bars or acrylic resin material before making impression. Some problems regarding to polymerization shrinkage of acrylic resin have been reported. In this study, we describe a metalacrylic bar tha...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Dyes and Pigments

سال: 2023

ISSN: ['1873-3743', '0143-7208']

DOI: https://doi.org/10.1016/j.dyepig.2023.111141