Evaluation of Cutting Performance using Water-soluble cutting fluid containing Graphene Oxides
نویسندگان
چکیده
منابع مشابه
Preparation of water-soluble nanographite and its application in water-based cutting fluid
Water-soluble nanographite was prepared by in situ emulsion polymerization using methacrylate as polymeric monomer. The dispersion stability and dispersion state of graphite particles were evaluated by UV-visible spectrophotometry and scanning electron microscopy, respectively. The water-soluble nanographite was then added into the water-based cutting fluid as lubricant additive. The lubricatio...
متن کاملEvaluation of Cutting Performance of Diamond Saw Machine Using Artificial Bee Colony (ABC) Algorithm
Artificial Intelligence (AI) techniques are used for solving the intractable engineering problems. In this study, it is aimed to study the application of artificial bee colony algorithm for predicting the performance of circular diamond saw in sawing of hard rocks. For this purpose, varieties of fourteen types of hard rocks were cut in laboratory using a cutting rig at 5 mm depth of cut, 40 cm/...
متن کاملEvaluation of Disc Cutter Performance in Rock Cutting Process Using 3D Finite Element Method
Today, numerical simulation can be used as a suitable tool to measure large quantities that are very expensive and, in some cases, impossible to measure. One of the important issues in predicting rock mass boreability in excavation with full face tunnel boring machines is estimating the discchr('39')s forces for rock cutting. For this purpose, the linear cutting test is employed. However, limi...
متن کاملStatistical modeling of main cutting force produced by wet turning using soluble oil - water mixture lubricant
Article history: Received 15 August 2010 Received in revised form 3 December 2010 Accepted 3 December 2010 Available online 4 December 2010 In this paper, we present machining tests by turning En-31 steel alloy with tungsten carbide inserts using soluble oil-water mixture lubricant under different machining conditions. Firstorder and second-order cutting force prediction models were developed b...
متن کاملA new approach to enhance final surface quality in drilling operation: evaluation of using alumina micro-particle additives on oil-water emulsion cutting fluid
Reaming is a common finishing process for improving the drilled holes surface quality. Choosing an appropriate finishing method in drilling process has a significant effect on the surface quality of holes and in decreasing the process total cost and time. In this study, four similar holes were drilled on the AISI 4340 workpiece with different two pair feed rates. The drilling process was perfor...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: The Proceedings of The Manufacturing & Machine Tool Conference
سال: 2019
ISSN: 2424-3094
DOI: 10.1299/jsmemmt.2019.13.b34