Evaluation of Fracture Toughness by Master Curve Approach Using Miniature Specimens
نویسندگان
چکیده
منابع مشابه
Behavior of Concrete round Double Beam Fracture Toughness Test Specimens
Laboratory fracture toughness tests of concrete using wedge-loaded round double beam specimens with a length to diameter ratio of 2:1 show two distinctly different specimen behaviors. Either the crack remains in the plane of the notch, and a valid test result can be obtained, or there is lateral cracking around mid-length which invalidates the results. Results of a controlled study show that th...
متن کاملDetermination of the Fracture Toughness Parameters of Cement Composite Using Specimens with Rounded Notch
The fracture mechanics parameters are used in different applications to formulae the classic criteria of failure as well as in computational models to analyze the concrete structures and other brittle materials. The parameters are determined using the specimens with notches. The study for assessing the influence of the notch curvature in specimen on fracture mechanics parameters, e.g. critical ...
متن کاملEvaluation of brittleness of porcelain fused to pure titanium by fracture toughness, hardness and fracture energy.
To elucidate the cause of brittleness of porcelain fused to pure titanium (PFPT) which leads to chipping and cracking similar to that of conventional porcelain in clinical use, fracture toughness KIc, hardness (Hv and Hk) and fracture energy gamma reflecting the bonding energy of atoms were evaluated. In KIc there were no differences between PFPT and conventional porcelain, nor for Hv and Hk, b...
متن کاملFracture toughness of dental composites determined using the short-rod fracture toughness test.
Plane strain fracture toughness (KIC) has been evaluated for a number of commercially-available dental composites. A modified Short-rod Fracture Toughness (SRFT) specimen design has been used, enabling small specimens to be tested conveniently. The effect on KIC of aging in water at 37 degrees C for seven days, one month, and six months has been determined for conventional, microfilled, and hyb...
متن کاملFracture toughness of graphene.
Perfect graphene is believed to be the strongest material. However, the useful strength of large-area graphene with engineering relevance is usually determined by its fracture toughness, rather than the intrinsic strength that governs a uniform breaking of atomic bonds in perfect graphene. To date, the fracture toughness of graphene has not been measured. Here we report an in situ tensile testi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A
سال: 2011
ISSN: 0387-5008,1884-8338
DOI: 10.1299/kikaia.77.680