Evaluation of N,N,N-Dimethylbutylammonium Methanesulfonate Ionic liquid for electrochemical recovery of lead from lead-acid batteries

نویسندگان

چکیده

Physicochemical and electrochemical properties of N,N,N-dimethylbutylammonium methanesulfonate, [DMBA][MS], ionic liquid (IL) have been determined, the potential application for recovery lead from lead-acid batteries is discussed. To optimise transport IL, dependences were measured conductivity, density viscosity with varying amounts excess acid water as a diluent in electrolyte mixture. Molar conductivities obtained molar concentration conductivity measurements used to quantify ionicities these IL mixtures. The solubility PbII PbCO3 was also shown depend strongly on composition. Preliminary results kinetics reduction showed fast Pb deposition potential-controlled electrodeposition morphologies Pb, which may be advantageous design up-scaled electrowinning processes.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

New Dynamical Models of Lead–Acid Batteries

This paper documents the main results of studies that have been carried out, during a period of more than a decade, at University of Pisa in co-operation with other technical Italian institutions, about models of electrochemical batteries suitable for the use of the electrical engineer, in particular for the analysis of electrical systems with batteries. The problem of simulating electrochemica...

متن کامل

Electrochemical Model for Ionic Liquid Electrolytes in Lithium Batteries

Room temperature ionic liquids are considered as potential electrolytes for high performance and safe lithium batteries due to their very low vapor pressure and relatively wide electrochemical and thermal stability windows. Unlike organic electrolytes, ionic liquid electrolytes are molten salts at room temperature with dissociated cations and anions. These dissociated ions interfere with the tr...

متن کامل

Secondary Batteries: Lead Acid Battery Thermal Runaway Chapter Heading for Encyclopedia of Electrochemical Power Sources

The thermal runaway effect observed in sealed lead acid batteries is reviewed and reassessed as a means for understanding the effect at a more fundamental level. It is to be noted that a popular explanation for the heat generated when a sealed cell is overcharged is that the oxygen recombination taking place at the negative electrode is an exothermic process. Although it is a fact that this rec...

متن کامل

Evaluation of Response Surface Methodology in Dispersive Liquid-Liquid Microextraction for Lead Determination Using Ionic Liquids

This paper describes a dispersive liquid–liquid microextraction (DLLME) procedure using room temperature ionic liquids (RTILs) coupled with flame atomic absorption spectrometry detection with microsample introduction system capable of quantifying trace amounts of lead. In the proposed approach, ammonium pyrrolidine dithiocarbamate (APDC) was used as a chelating agent and 1-hexyl-3-methylimmidaz...

متن کامل

Stationary Lead-Acid Batteries With Selenium Alloys

Until ten years ago the grids of lead-acid batteries were usually made of lead-antimony alloys containing 5-11 wt. % antimony. The necessary mechanical strength and castability are easily achieved with this content of antimony. However, the unavoidable corrosion of the positive grid liberates antimony from the grid, which proves to be both unfavorable as well as unfavorable with respect to batt...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Electrochimica Acta

سال: 2021

ISSN: ['1873-3859', '0013-4686']

DOI: https://doi.org/10.1016/j.electacta.2021.137893