Evaluation of solidification cracking susceptibility during laser welding in advanced high strength automotive steels

Laser welding of modern automotive high strength steels

The paper demonstrates the correlation between the chemical composition of steel grades and the hardness as well as the formability of laser welds generated with modern automotive high strength steel grades. At the very low heat input of industrial laser welding and the resulting extremely high cooling rate, the weld hardness is fully controlled by the carbon content of the base materials and n...

Effect of grain size on solidification cracking susceptibility of type 347 stainless steel during laser welding

Welding challenges facing advanced automotive steels in resistance spot welding process: A review

Nowadays, the use of advanced high strength steels (AHSSs) in body-in-white is one of the hot applied strategies which is followed by the most of the automakers. The study of weldability and weld challenges facing these steels in resistance spot welding process as the most widely used process in the assembly lines of the automotive industry is essential to use the outstanding mechanical respons...

Welding challenges facing advanced automotive steels in resistance spot welding process: A review

Nowadays, the use of advanced high strength steels (AHSSs) in body-in-white is one of the hot applied strategies which is followed by the most of the automakers. The study of weldability and weld challenges facing these steels in resistance spot welding process as the most widely used process in the assembly lines of the automotive industry is essential to use the outstanding mechanical respons...

Damage Behavior in Modern Automotive High Strength Dual Phase Steels During Uniaxial Tensile Deformation

In the present research, damage mechanisms during room temperature uniaxial tensile testing of two different modern high strength dual phase steels,DP780 and DP980, were studied. Detailed microstructural characterization of the strained and sectioned samples was performed by scanning electron microscopy (SEM). The results revealed that interface decohesion, especially at the triple junctions of...