Evaluation of Steel Shear Walls Behavior with Sinusoidal and Trapezoidal Corrugated Plates
نویسندگان
چکیده
منابع مشابه
Finite Element Method for Static Cyclic Behavior of Steel Shear Wall with Corrugated Plates
The system of steel shear wall is an initiative resistance system against the lateral load such as an earthquake and the wind that has been researched in the last three decades. Currently, this system is noticed more than other systems because of adequate stiffness, ductility, and more energy absorption. The system of steel shear wall with corrugated sheets has been offered as an innovative sys...
متن کاملComparison of plasticity and stiffness of steel shear walls with composite steel plate shear wall
The steel shear wall and composite steel plate shear wall is introduced in recent three decade and is considered and is spread rapidly. Composite steel plate shear wall which is made of a layer of thin steel sheet with coating of reinforced concrete in one or both sides of steel palate is considered a third generation of resistance shear walls against lateral loads that in addition to increasin...
متن کاملAn Experimental Study on the Shear Hysteresis and Energy Dissipation of the Steel Frame with a Trapezoidal-Corrugated Steel Plate
The steel frame reinforced with steel shear wall is a lateral load resisting system and has higher strength and shear performance than the concrete shear wall system. Especially, using corrugated steel plates in these shear wall systems improves out-of-plane stiffness and flexibility in the deformation along the corrugation. In this paper, a cyclic loading test of this steel frame reinforced wi...
متن کاملNon-Linear Behavior and Shear Strength of Diagonally Stiffened Steel Plate Shear Walls
In this study, non-linear behavior of diagonally stiffened steel plate shear walls as a seismic resisting system has been investigated, and theoretical formulas for estimating shear strength capacity of the system have been proposed. Several validated analytical finite element models of steel shear walls with various stiffener dimensions are generated to verify and compare the analytical and th...
متن کاملImproving Cyclic Behavior of Steel Plate Shear Walls with Elliptical Perforations
In this paper, the effect of elliptical shape openings was numerically compared to the case when circular openings were used in the steel panel shear walls. At first, the finite element model in ABAQUS was calibrated by experimental results, obtained from previous studies. Then, three steel shear panels with different sizes of elliptical openings were analyzed under cyclic loads, and the result...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Advances in Civil Engineering
سال: 2015
ISSN: 1687-8086,1687-8094
DOI: 10.1155/2015/715163